According to the latest renderings released by whistleblower Ian Zelbo, the iPhone 14 Pro may have a significantly more rounded body to match the larger rear camera module.
Zelbo often creates renderings for upcoming Apple devices based on leaked information. By referring to CAD renderings and dimensions, schematics, images of accessory production molds, and other information, Zelbo found that the iPhone 14 Pro was exposed to have larger body corners compared to the iPhone 13. On the other hand, the radius of the iPhone 14 Pro Max seems to be almost the same as that of the iPhone 13 Pro Max.
Apple may change the corner radius of the iPhone 14 Pro due to changes in the rear camera module. The iPhone 14 Pro is expected to be equipped with a larger rear camera module with a new 48MP camera and a 57% larger sensor.
IT Home learned that the rear camera modules of the iPhone 12 Pro and iPhone 12 Pro Max roughly match the corner radius of the phone, but the iPhone 13 Pro and iPhone 13 Pro Max do not match. Although the difference between the camera modules of the iPhone 12 Pro Max and iPhone 13 Pro Max is small, the difference between the iPhone 12 Pro and iPhone 13 Pro is huge.
And this year, as the size has increased again, it may be that the iPhone 14 Pro's lens module and the body's rounded corners are too inconsistent, causing Apple to modify the design. According to Zelbo, the new larger corner radius still does not completely match the rounded corners of the rear camera module, but it is obviously closer.
The iPhone 14 Pro's screen may also have contributed to the change. Instead of a notch, the device's centered "pill + punch hole" front-facing TrueDepth camera array is expected to be one of the device's major upgrades, and it's rumored to have 20% smaller screen borders.
Previous article:Lishui Zhongxin Wafer's annual production of 2.4 million 12-inch epitaxial wafers will start trial production before the end of the year
Next article:CIRP report: iPhone 13 is the most popular, while the mini version is still unpopular
Recommended ReadingLatest update time:2024-11-15 16:31
- Apple faces class action lawsuit from 40 million UK iCloud users, faces $27.6 billion in claims
- Apple and Samsung reportedly failed to develop ultra-thin high-density batteries, iPhone 17 Air and Galaxy S25 Slim phones became thicker
- Micron will appear at the 2024 CIIE, continue to deepen its presence in the Chinese market and lead sustainable development
- Qorvo: Innovative technologies lead the next generation of mobile industry
- BOE exclusively supplies Nubia and Red Magic flagship new products with a new generation of under-screen display technology, leading the industry into the era of true full-screen
- OPPO and Hong Kong Polytechnic University renew cooperation to upgrade innovation research center and expand new boundaries of AI imaging
- Gurman: Vision Pro will upgrade the chip, Apple is also considering launching glasses connected to the iPhone
- OnePlus 13 officially released: the first flagship of the new decade is "Super Pro in every aspect"
- Goodix Technology helps iQOO 13 create a new flagship experience for e-sports performance
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Huawei's Strategic Department Director Gai Gang: The cumulative installed base of open source Euler operating system exceeds 10 million sets
- Download from the Internet--ARM Getting Started Notes
- Learn ARM development(22)
- Learn ARM development(21)
- Learn ARM development(20)
- Learn ARM development(19)
- Learn ARM development(14)
- Learn ARM development(15)
- Analysis of the application of several common contact parts in high-voltage connectors of new energy vehicles
- Wiring harness durability test and contact voltage drop test method
- Windows PowerShell Field Guide (3rd Edition)
- MSP430F5529 clock 25MHz setting method
- I found the fish's partner - [Electronic Components Artwork]
- ESD protection and elimination methods in switching power supply design and production
- Serializer pairing problem
- Is the transmit power of a thermal imager compensated by software or achieved by configuring the sensor?
- How to achieve the effect of 1+1>2? Of course, one machine with multiple uses! ——Introduction to ATG-2000 Series Power Signal Source
- Integrated Circuit Design Handbook.pdf
- How to plan the frequency of transceivers
- [MSP430F5529 Review] 4. SPI Communication MAX7219 Driving LED Dot Matrix