TI eSMO library Fsmopos and Gsmopos parameter analysis

Jacktang

TI eSMO library Fsmopos and Gsmopos parameter analysis [Copy link]

In terms of motor sensorless control algorithm, TI provides eSMO sliding mode observer to calculate the motor rotor angle. In terms of application, TI provides eSMO lib file and related documents to explain the use of eSMO, but in the process of use, it may not be possible to understand the meaning of Fsmopos and Gsmopos from the related documents, which is not convenient for debugging. Therefore, this article mainly derives the TI eSMO current calculation formula, and derives the Fsmopos and Gsmopos (referred to as F and G respectively) formulas. At the same time, we can see the difference between TI's calculation and other F and G calculation methods from the derived formula, which deepens our understanding and proficient application.

The mathematical model of PMSM in the stationary α and β coordinate system is as follows:

(1)

The structural mathematical model of TI eSMO sliding mode observer is as follows

From the structural point of view, it is relatively clear and straightforward. The switch switching function is used to estimate the back electromotive force, thereby obtaining the motor rotor angle.

Thus we can get the following observer expression

in

Based on the above formula, we solve the eSMO current on the α axis, and similarly we can get the β axis current formula.

The solution of the current in the time domain is:

The current solution corresponding to discrete time Ts is

(1)

So we get:

(2)

(2) – (1) gives

Thus we can get

Note: If the discrete time Ts is small enough, an approximation can be used.

Then there is

This works just like any other expression in non-exponential form.

alan000345

Learned

freebsder

Good stuff! Can you tell me where the original article is?

alan000345

freebsder posted on 2020-11-9 22:19 Good stuff! Can you tell me where the original article is?

This is pretty good.