The internal VLO of G2231 is 12K, and SMCLK, ACLK, and MCLK all use VLO. In the main program, let while (1) { P2OUT |= BIT7 ; P2OUT &= ~BIT7; } flip the output. It is found that the high and low level
[i=s] This post was last edited by suoma on 2017-4-23 10:49 [/i] Continuing from the previous post [LMR24220 multi-rail power supply reference board] Development board and chip introduction - Power su
Hello everyone, I am using Advantech's PCM-9375 development board, Windows CE 6.0, and a CF card for storage. Now I have discovered a problem: whether using Bios Boot Loader or MS-Dos&Loadcepc, it is
Many people lay out the boards at different times. Or everyone considers different factors when laying out the boards at different times. Let's investigate.
Require:1. Processing power: no less than 3200MIPS2.Boot method: EEPROM Boot3. External memory: capacity not less than 1MB, speed not less than 200MHz4.FIFO: 4 channels, for 4-channel high-speed AD/DA