• You can log in to your eeworld account to continue watching:
  • (b) NUMBER ON A CIRCUIT - 210.11(A)
  • Login
  • Duration:5 minutes and 38 seconds
  • Date:2022/09/28
  • Uploader:Lemontree
Introduction
keywords: electronic system
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

Unfold ↓

You Might Like

Recommended Posts

RF Antenna Switch Simplifies Radios in Telematics
Telematics is the combination of computer technology and communication technology, which is being applied to several fast-growing markets, including the automotive industry. Telematics supports remote
JasonYoo RF/Wirelessly
Practical sine wave generating circuit diagram
Practical sine wave generating circuit diagramAuthor: Unknown Article Source: UnknownPractical sine wave generating circuit diagram: Below is a sine wave circuit made with a TL082 op amp! Follow the c
fighting Analog electronics
Classic Circuit in ADI Experimental Circuit---Sensor Current Input Circuit
There are some classic circuits in ADI experimental circuits. I would like to share with you the current output circuit for testing sensors: (This circuit is in CN-145)
dontium ADI Reference Circuit
[Topic] B Metal Object Detection Locator
[i=s]This post was last edited by paulhyde on 2014-9-15 03:00[/i] [align=center]2014 TI Cup Undergraduate Electronic Design Competition[/align] [align=center]Question B: Metal Object Detection Locator
Sur Electronics Design Contest
How to make QT program call hardware driver application
As the title says: The QT interface application has been completed, but it is still only a top-level application and does not have the ability to control the underlying hardware (or the ability to int
郑小气聋子 Programming Basics
Qualcomm MSM5100 chip programming
I'd like to ask everyone, does anyone know what programming language is used for the Qualcomm MSM5100 chip? My boss wants to use this chip, but I don't have any information. If any netizen can provide
candyhuliang Embedded System

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号