• You can log in to your eeworld account to continue watching:
  • ELECTRIC WELDER CIRCUIT CONDUCTORS - 240.4(G) AND TABLE 240.4(G)​​​​​​​
  • Login
  • Duration:3 minutes and 53 seconds
  • Date:2022/09/28
  • Uploader:Lemontree
Introduction
keywords: electronic system
Switchboards are designed with busbars for fuses or circuit breakers that are used for protecting and supplying feeders and branch circuits. Panelboards are designed with a permanently installed main circuit breaker or single set of fuses for disconnecting the number of circuit breakers or fuseholders installed to protect and supply feeders or branch circuits.

SUPPORT AND ARRANGEMENT OF BUSBARS AND CONDUCTORS
408.3

Busbars shall be held firmly in place in the enclosure and shall be arranged in such a way to allow adequate space for conductors to be terminated. Busbars shall be sized with enough capacity to handle the normal currents in amps of the electrical system. In addition, they shall carry safely any type of short-circuit or ground-fault condition.

CONDUCTORS AND BUSBARS ON A SWITCHBOARD OR PANELBOARD
408.3(A)

Conductors and busbars on a switchboard, panelboard, or control board shall be so located as to be free from physical damage. Service sections of such boards shall be separated from the other electrical components. These components shall be properly secured in an approved manner. 

Note, conductors entering a certain section shall terminate in such section, except where it is not practical for control, interconnecting conductors, or other conditions of use.

OVERHEATING AND INDUCTIVE HEATING
408.3(B)

The arrangement of busbars and conductors shall be such as to avoid overheating due to inductive effects. The inductive effect of each conductor is neutralized when grouping all conductors together. To accomplish the minimizing of heating effects, the ungrounded (phase) conductors, grounded (neutral) conductors, and equipment grounding conductors, where used, shall be in the same enclosure, raceway, cable, cord, etc. (See Figure 7-1)

Unfold ↓

You Might Like

Recommended Posts

How to develop digital TV under wince6.0
How to develop digital TV under wince6.0, is there any relevant information? Please send me a copy. It would be best if you can provide an idea. Thank you
jimmyyuyu WindowsCE
Motor Control
I want to use a single chip microcomputer to control two motors to move along the XY axis, but I don't know how to program it? Please help me, experts
流星追月 MCU
There is a serial communication protocol that needs to be analyzed and cracked, and I am looking for help from experts
There is a serial communication protocol that needs to be analyzed and cracked. I am looking for help from experts! Thank you! to:hawking20001981 (Dongdong VC++ Primer) Please contact me as soon as po
simon_eun Embedded System
[Question] WINCE implements HIVE problem 3: Have you encountered such an error? Invalid size specification (e32_vsize == 0) in m
[Question] Problem 3 of HIVE implementation in WINCE: Have you encountered such an error? Invalid size specification (e32_vsize == 0) in module boot.hv [color=#33CCCC]I. Environment description[/color
liguangemail WindowsCE
Altera BlockRAM related settings
Does Altera's BlockRam have a Read before Write function like Xilinx? That is, when WriteEN is pulled up, the data in the Address will be output first and then written. In Quartus IP, I only found Rea
simonsss Altera SoC
When the operating system is vxworks, how can I check the performance of each function defined when testing c?
There are corresponding tools to view it under Windows, but I don't understand it under VxWorks
coolbi5 Real-time operating system RTOS

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号