With the intelligent development of automobile cockpits, its comfort has attracted more and more attention from users. In order to improve the user experience, more and more actuators are used in the cockpit to improve the comfort of the cockpit, and seat ventilation is one of the applications. Nanochip NSUC1610 is an ARM MCU that integrates a 4-way half-bridge driver. As a single-chip automotive small motor driver SoC, NSUC1610 supports direct power supply from 12V automotive batteries, complies with AEC-Q100 standards, and has a wide range of uses in the automotive field. It is suitable for controlling low-power motors and can drive BDC, BLDC and stepper motors. It helps customers reduce PCB size, simplify production design, and achieve more efficient, compact and cost-effective motor control designs.
Total of 1 lessons6 minutes and 19 seconds
"Follow me activity" is a one-year activity launched by DigiKey and EEWORLD to "learn technology from technology experts and get cash back for completing tasks". There are 4 issues in 2023. Every three months, technical experts will recommend development boards/instrument kits with strong playability and learnability, and lead everyone to practice them.
Total of 1 lessons38 minutes and 2 seconds
On-point Atomic Navigator ZYNQ video first issue FPGA design chapter Navigator V2
Total of 125 lessons2 days and 5 hours and 58 minutes and 11 seconds
Total of 5 lessons1 hours and 17 minutes and 11 seconds
This set of tutorials uses the new version of Altium Designer 20 to explain it in stages. From the creation of schematic libraries, schematics, PCB libraries to the layout and routing of PCB design, the whole process is explained and communicated live. How to draw each device? How is it placed? How to pull each wire? What are the power cords? What are signal lines? These will be explained in detail one by one, and novices can generally do it themselves after reading it once. The whole process from scratch is explained clearly, so that as a novice, you can really learn something.
Total of 38 lessons11 hours and 46 minutes and 56 seconds
This course is the STM32MP157 hetero-core communication development course in the series of courses taught by Punctual Atom to teach you step-by-step on Linux. The supporting development board of this course is the Punctual Atom STM32MP157 development board. STM32MP157 is multi-core heterogeneous, with Cortex-A7 running the Linux operating system and Cortex-M4 running bare metal. This course introduces how to implement inter-core communication between Cortex-A7 and Cortex-M4.
Total of 104 lessons1 days and 11 hours and 23 minutes and 50 seconds
Total of 391 lessons1 days and 15 hours and 4 minutes and 57 seconds
The industrial control system is a business process management and control system that ensures the automated operation, process control and monitoring of industrial infrastructure, consisting of various automation control components and process control components that collect and monitor real-time data. Its core components include Supervisory Control and Data Acquisition System (SCADA), Distributed Control System (DCS), Programmable Controller (PLC), Remote Terminal (RTU), Human-Machine Interface Equipment (HMI), and devices that ensure communication between components. interface technology. Among them, DCS and PLC play core functions such as data processing and execution in the system. ADI has always pursued continuous innovation to empower various industries. What this speech brings to you is ADI's innovative technologies applied in industrial DCS and PLC to help the industry revolution and realize Industry 4.0.
Total of 1 lessons1 hours and 5 minutes and 56 seconds
[Luban Cat] is a high-performance card computer brand launched by Yehuo. In the name of Luban, engineers are encouraged to inherit the innovative spirit of craftsmen like Luban and strive to become contemporary Luban; with the shape of a kitten, we hope that everyone will be as curious as children and cats. The spirit of exploration never stops, and the childlike innocence is always maintained.
Total of 42 lessons12 hours and 46 minutes and 16 seconds
The first part is "emWin Control Application Development", which focuses on explaining the basic functions of emWin and how to use common controls. The second part is practical comprehensive routines.
Total of 38 lessons17 hours and 54 minutes and 1 seconds
ams Osram has focused on the development of plant lighting devices for many years and has a large product portfolio to support the needs of different applications to meet the diverse uses of customers. 1. Plant lighting trend analysis and future market prospects; 2. Introduction of white light product OSCONIQ SFC 3030; 3. Introduction of red light product GH CSSRM6.24; 4. Introduction of professional-grade high-PPE product OSLON Square Batwing series.
Total of 1 lessons39 minutes and 39 seconds
"Follow me activity" is a one-year activity launched by DigiKey and EEWORLD to "learn technology from technology experts and get cash back for completing tasks". There are 4 issues in 2023. Every three months, technical experts will recommend development boards/instrument kits with strong playability and learnability, and lead everyone to practice them. This video is the replay of FollowMe’s third live broadcast.
Total of 1 lessons45 minutes and 13 seconds
As automobile power systems move from traditional internal combustion engines to hybrid and electric models, e-Compressor is not only used to control the body's heating and cooling air conditioning to adjust the cabin temperature, but can also be used for thermal management of electric vehicle batteries. Therefore, a reliable and strong power chip is crucial to driving safety. This online seminar will discuss a series of ON Semiconductor's ASPM modules for e-Compressor, which integrate gate drivers and have the advantages of miniaturization and high power density. At the same time, the new M3 SiC Mosfet will also be introduced and the mutual advantages of SiC and IGBT will be compared.
Total of 1 lessons44 minutes and 7 seconds
Electric vehicle chargers are often combined with energy storage systems to better manage power drawn from the grid. By using optimized isolated gate drivers, engineers can take full advantage of power modules and discrete devices to provide reliable control of Mosfets. This webinar will focus on ON Semiconductor's gate drivers and discuss how to optimize the gate drive voltage design for speed, thereby minimizing switching losses and taking full advantage of the device. It will also explain the problems that may be encountered when using gate drivers and how to deal with them. Finally, a series of new products will be shared with you for engineers to choose.
Total of 1 lessons18 minutes and 47 seconds
Introducing two brand new sensors from ON Semiconductor, which can be used in many applications such as industrial automation, smart homes/buildings, robots, security/monitoring, etc. The new 20MP high-resolution sensor AR2020 features industry-leading energy efficiency and performance, 75dB extended dynamic range and >100dB, with row-staggered LI-HDR. High quantum efficiency QE provides excellent performance in low light conditions. Another low-power 8MP 4K rolling shutter RGBIR image sensor, AR0830, has leading low-light performance SNR1 1.1 lux, good dynamic range 94dB, single-exposure on-chip eDR, and double-exposure off-chip LI-HDR, supporting mainstream video formats 4K60, 1080P120. At the same time, the motion wake-up function suitable for access control and conference applications is introduced, including its principle and demonstration.
Total of 1 lessons22 minutes and 51 seconds
This workshop covers code proofs, runtime proofs, and an overview of OEM best practices. Microchip will show you how to securely develop and sign an image file, then receive and authenticate the image file on the client.
Total of 1 lessons31 minutes and 37 seconds
Nexperia helps achieve excellent performance solutions for multiple applications such as automobiles, industry, energy, communications, etc., including silicon carbide SiC product solutions to be launched for EV-Charger and OBC markets. This conference will focus on EV charging systems, and For this reason, Nexperia will bring the excellent performance characteristics of the SiC MOSFET 1200V/40, 80mR product series. Quickly understand and become familiar with the product features of Nexperia SiC MOSFET and its application in EV-Charger to provide better choices and shorten the cycle for subsequent development.
Total of 1 lessons39 minutes and 47 seconds
This set of tutorials uses the new version of Mentor Expedition VX2.3 to explain in stages. From the creation of schematic libraries, schematics, PCB libraries to the layout and routing of PCB design, the whole process is explained and communicated with everyone. How to draw each device? How is it placed? How to pull each wire? What are the power cords? What are signal lines? These will be explained in detail one by one, and novices can generally do it themselves after reading it once. The entire process from scratch is explained clearly, so that as a novice, you can really learn something.
Total of 23 lessons6 hours and 54 minutes and 10 seconds
This set of tutorials uses the new version of Cadence Allegro 16.6 to explain it in stages. From the creation of schematic libraries, schematics, PCB libraries to the layout and routing of PCB design, the whole process is explained and communicated with everyone. How to draw each device? How is it placed? How to pull each wire? What are the power cords? What are signal lines? These will be explained in detail one by one, and novices can generally do it themselves after reading it once. The entire process from scratch is explained clearly, so that as a novice, you can really learn something.
Total of 34 lessons9 hours and 25 minutes and 50 seconds
This set of tutorials uses the new version of Mentor PADS VX2.5 to explain in stages. From the creation of schematic libraries, schematics, PCB libraries to the layout and routing of PCB design, the whole process is explained and communicated with everyone. How to draw each device? How is it placed? How to pull each wire? What are the power cords? What are signal lines? These will be explained in detail one by one, and novices can generally do it themselves after reading it once. The entire process from scratch is explained clearly, so that as a novice, you can really learn something.
Total of 20 lessons6 hours and 53 minutes and 41 seconds
We found that many engineers are not standardized enough in PCB design, from the initial layout of the fan holes to the later rules and wiring. These factors may also affect the performance of the board in the later stage. What we have to do is To reduce the occurrence of this situation, strictly follow the design specifications when designing.
Total of 4 lessons1 hours and 26 minutes and 4 seconds
What is impedance? How should multi-layer boards be stacked? How thick should the PCB traces be? Are these problems very familiar? This is a common problem for many engineers. In fact, this is a problem of not understanding the lamination and impedance. In this live broadcast, we comprehensively analyze the stacking control of multi-layer boards and how to calculate impedance, and teach you how to easily solve the impedance and stacking in high-speed PCB design.
Total of 5 lessons1 hours and 23 minutes and 30 seconds
Switching power supply is the basis for learning electronic technology, and it is also a must-learn basis for us to learn any electronic technology. The switching power supply is also composed of unit circuits. Among these unit circuits, the oscillation circuit is the main component of the switching power supply. Basic core circuit
Total of 3 lessons34 minutes and 2 seconds
The course mainly talks about the architecture and board-level design technology of zero-IF receivers, superheterodyne receivers, and dual-conversion transmitters, and explains in detail the core of RF devices such as amplifiers, mixers, VCOs, limiters, and filters. Technology and Applications.
Total of 5 lessons1 hours and 13 minutes and 49 seconds
Phased array antenna refers to an antenna that changes the pattern shape by controlling the feed phase of the radiating units in the array antenna. It is an area array composed of a large number of identical radiating units. Each radiating unit is independently wave-controlled in phase and amplitude. and phase shifter control to obtain accurate and predictable radiation patterns for beam control and scanning. Phased array is mainly composed of three parts: antenna array element, wave control network and power divider. Its technology involves radio frequency transceiver system, amplifier, filter, phase shifter, power divider, antenna design, micro-assembly process, etc. Therefore, , phased array design technology can be called the "ceiling-level" technology in the microwave field.
Total of 5 lessons1 hours and 6 minutes and 49 seconds
This set of tutorials uses the new version of Cadence Allegro 22.1 to explain it in stages. From the creation of schematic libraries, schematics, PCB libraries to the layout and routing of PCB design, the whole process is explained and communicated live. How to draw each device? How is it placed? How to pull each wire? What are the power cords? What are signal lines? These will be explained in detail one by one, and novices can generally do it themselves after reading it once. The entire process from scratch is explained clearly, so that as a novice, you can really learn something.
Total of 53 lessons13 hours and 3 minutes and 28 seconds
MPS micropower isolated power modules are designed to provide a strong electrical isolation barrier for signal transmission, with optional 5V or 3.3V output and up to 1W output power. MPS's new generation micropower isolated power module MIE series products have better regulation rate, larger rated power and smaller package, further improving customers' cost-effectiveness.
Total of 1 lessons44 minutes and 29 seconds
Many beginners don’t know what elements are in the PCB package? What exactly do the elements in the PCB package correspond to on the actual PCB? For these questions, many beginners use Baidu to understand. The explanations from Baidu are all text explanations, which makes it difficult for beginners to truly understand. We hope that through our live broadcast, we can clear away the clouds and point out the way forward for students who want to understand PCB packaging.
Total of 6 lessons1 hours and 28 minutes and 42 seconds
In order to solve the problems reported by students that Allegro is difficult to operate, cannot use the new version, do not know where to start learning this tool, and cannot install it, we used the latest version of CadenceAllegro17.4 to record this course. List some commonly used operations of the software from the following directions: schematic symbols, schematic drawing, PCB packaging, and PCB drawing. Each operation will be explained in a hands-on manner, and important knowledge points will be explained. The PPT list allows every student to quickly master and apply it to high-speed PCB design practice.
Total of 66 lessons19 hours and 43 minutes and 5 seconds
"Follow me activity" is a one-year activity launched by DigiKey and EEWORLD to "learn technology from technology experts and complete tasks with cash back and reimbursement". There are 4 issues in 2023. Every three months, technical experts will recommend development boards/instrument kits with strong playability and learnability, and lead everyone to practice them. This is the second event. The live broadcast will show everyone how to operate the Adafruit ESP32-S3 TFT Feather development board.
Total of 1 lessons1 hours and 11 minutes and 3 seconds
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
