FPGA wiring design adds a powerful tool - fully automatic IO port SWAP

yepeda

FPGA wiring design adds a powerful tool - fully automatic IO port SWAP [Copy link]

Before starting the wiring work, PCB engineers can use this program to automatically swap the signals that are allowed to swap and adjust the line's mouse line, avoiding swapping while routing, and effectively improving the efficiency of FPGA wiring design.

The software can realize automatic swap of IO ports of the following types of devices, and automatically filter power signals, differential signals, and clock signals.

SMD1: A surface mount device with only one row or one column of pins.

SOP: A surface mount device with only 2 rows or 2 columns of pins.

QFP: A surface mount device with 2 rows and 2 columns of pins.

SMD2: Surface mount device with more than 2 rows or 2 columns of pins;

BGA: A surface mount device with more than 90% of its pins being round;

SIP: A device with only one row or one column of pins.

DIP: A device with only 2 rows or 2 columns of pins.

QIP: A through-hole device with 2 rows and 2 columns of pins.

CONNECTOR: A device with more than 2 rows or columns of pins.

1. AutoSwapAll button

Automatically search for devices on the entire board that are allowed to be swapped, and automatically swap the IO ports of these devices.

2. SelectSwap button

The user selects to specify one or some devices, and automatically swaps the IO ports of the selected devices.

qwqwqw2088

It's really a sharp weapon