FPGA and DAC0832 interface circuit
Source: InternetPublisher:两手空空 Keywords: FPGA DAC0832 Interface Circuit Updated: 2024/07/19
FPGA_IO1~8 transmit data to the data input port (DI0~DI7) of DAC0832.
FPGA_IO9 provides DAC0832 data latch enable control signal ILE, which is valid at high level.
FPGA_IO10 provides DAC0832 control signal (CS: chip select signal; Xfer: data transmission control signal; WR1, WR2: DAC register write enable signal), which is valid at low level.
Iout1, Iout2, Rfb and operational amplifier LM324 complete current/voltage conversion (DAC0832 is a current output type).
- Schematic diagram of MCU SPI interface circuit
- Improved circuit diagram of 8050 transistor emitter drive relay
- Phase-locked loop controller using AT89S51 microcontroller
- Interface circuit composed of 74LS164 and 8051 microcontroller
- Using 89C2051 to make a four-way digital display water level controller circuit
- Interface circuit between CAN bus controller and single chip microcomputer
- How to design an ESP32-based microcontroller development board
- How to make a super solar tracker using ESP8266
- 24cxx replicator circuit
- Microcontroller test board circuit 5
- Switch signal input interface circuit
- FM24C256 interface circuit
- Alarm interface circuit
- Thyristor triggered interface circuit b
- It is the interface circuit between AD574 and printer.
- AD574 and RS-232C interface circuit
- ADC0809 and PC bus interface circuit
- Indoor unit microprocessor communication interface circuit
- MAX230 multi-channel data interface circuit
- Interface circuit between CMOS and NMOS a