#includevoid main(void) { WDTCTL=WDTPW+WDTHOLD; P1DIR|=(BIT1+BIT2+BIT3+BIT4+BIT5);//P1.1-P1.5 is the output direction P1OUT=0x00; //Pull all low, initialize all LEDs to turn off TA0CCTL1=CCIE; //Captu
Dear experts, how can msp430 write data to an address greater than 0XFFFF?
Because the FLASH address of MSP4305438 is from 0X5c00 to 0X45bff (20-bit addressing), but in the simulation debugging proces
[hide]Like semiconductor devices, the analysis of the causes of early failure of light-emitting diodes (LEDs) is an important part of reliability work and a proactive method to improve LED reliability
Electronic engineers are a group of men full of wisdom and rationality. They use a logical way of thinking, but their lives are illogical: they get up earlier than chickens, go to bed later than young