First of all, I have to say that Launchpad is a very practical development tool. From the usage point of view, the JTAG of the onboard SBW is quite practical. It can also simulate my MSP430F5438 board
I have a basic question. I am using a 2440 board. I first download Uboot to NorFalsh through jtag, then download Eboot and NK to NandFalsh through Uboot, and then start running from NandFalsh. 1. Can
I use the G2553 serial port process, the sending data can enter the receiving interrupt, but mask TXBUF = RXBUF, assign the value in the receiving register to a variable, it can only enter the interru
I burned nboot into BL0 of FLASH, and then burned EBOOT into BL2, and then downloaded NK.BIN into FLASH through EBOOT. Question 1: So where is the NK.BIN downloaded into FLASH by EBOOT? Is the code in