Training

Location:Training / Robot / Modern Robotics: Mechanics, Planning, and Control / Polynomial Via Point Trajectories

You can log in to your eeworld account to continue watching：
Polynomial Via Point Trajectories
Login

Duration：2 minutes and 59 seconds
Date：2019/06/20

Uploader：木犯001号

Introduction

keywords： robot control planning

The most important concepts in modern robotics. A study of the kinematics, dynamics, motion planning, and control of mobile robots and robot arms.

You Might Like

Recommended Posts

EEWORLD University Hall----Live Replay- Cytech and ADI join hands: Hidden costs of isolation system design: Live Replay - Cytech and ADI: Hidden Costs of Isolation System Design : https://training.eeworld.com.cn/course/5627; hi5 Integrated technical exchanges

[Lack of chips but not new products] Arteli AT32F435 series is coming: 288MHz, M4 core + FPU: There is a shortage of chips but no shortage of new products. The pace of manufacturers releasing new products does not seem to be affected at all, and our forum friends have not stopped paying attent; nmg Domestic Chip Exchange

[Contactless facial recognition access control system] + Creation of 5-EFR32BG22 Bluetooth host: EFR32BG22 is a Bluetooth chip from Silicon Labs that can implement BLE host and slave functions. It contains a cortex-M33 core. To use EFR32BG22, you need to use its supporting IDE, "simplicity studio; manhuami2007 DigiKey Technology Zone

Share a STLINK V2_1 PCB project, which can be directly sampled and produced: Share a PCB project of STLINK V2_1, which can be directly proofed and producedSupports SWD mode, with virtual serial port, supports USB download,supports automatic firmware upgradeFirmware refer to th; 通宵敲代码 stm32/stm8

Summary of PCB layout and wiring rules: , 68, 68)]10 rules for component layout: [/color][/size][/font][/color][/align] [color=rgb(0, 0, 0)][font=myFont, "][size=14px][backcolor=transparent][/backcolor][/size][/font][/color][align=left][col; ohahaha PCB Design

The input is 3.3V TTL high and low level. In theory, the output of Darlington should be the opposite level of TTL. I checked it...: The input is 3.3V TTL high and low level. The Darlington output should be the opposite level of TTL. I checked and it is always in the same state. What's going on?Also, the PMOS at the back end is alw; chuzhaonan Motor Drive Control（Motor Control）

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号