AT91SAM9X25 AT91SAM9G25 OpenWrt compilation and debugging pitfalls

Publisher:SereneHeartLatest update time:2022-06-29 Source: eefocusKeywords:OpenWrt  compile  debug Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

[    4.250000] usbcore: registered new interface driver usbfs

[    4.250000] usbcore: registered new interface driver hub

[    4.260000] usbcore: registered new device driver usb

[    4.330000] SCSI subsystem initialized

[    4.340000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    4.360000] ehci-platform: EHCI generic platform driver

[    4.370000] ehci-atmel: EHCI Atmel driver

[    4.370000] atmel-ehci 700000.ehci: EHCI Host Controller

[    4.380000] atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1

[ 4.390000] atmel-ehci 700000.ehci: irq 36, io mem 0x00700000

[    4.410000] atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00

[    4.420000] hub 1-0:1.0: USB hub found

[    4.420000] hub 1-0:1.0: 3 ports detected

[    4.450000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    4.460000] ohci-platform: OHCI generic platform driver

[    4.480000] ohci-atmel: OHCI Atmel driver

[    4.490000] at91_ohci 600000.ohci: USB Host Controller

[    4.490000] at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2

[    4.500000] at91_ohci 600000.ohci: irq 36, io mem 0x00600000

[    4.570000] hub 2-0:1.0: USB hub found

[    4.580000] hub 2-0:1.0: 3 ports detected

[    4.590000] usbcore: registered new interface driver usb-storage

[    4.610000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*

[ 4.620000] init: - preinit -

[    6.820000] random: jshn: uninitialized urandom read (4 bytes read, 74 bits of entropy available)

[    7.010000] random: jshn: uninitialized urandom read (4 bytes read, 76 bits of entropy available)

[    7.200000] random: jshn: uninitialized urandom read (4 bytes read, 77 bits of entropy available)

[    7.370000] random: jshn: uninitialized urandom read (4 bytes read, 79 bits of entropy available)

[    7.530000] random: jshn: uninitialized urandom read (4 bytes read, 80 bits of entropy available)

[    7.710000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

Press the [f] key and hit [enter] to enter failsafe mode

Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level

[   11.490000] UBIFS (ubi0:1): default file-system created

[   11.510000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 424

[   11.540000] random: procd: uninitialized urandom read (4 bytes read, 92 bits of entropy available)

[   11.560000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"

[   11.570000] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[   11.580000] UBIFS (ubi0:1): FS size: 242651136 bytes (231 MiB, 1911 LEBs), journal size 12189696 bytes (11 MiB, 96 LEBs)

[   11.590000] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)

[   11.600000] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 0CCEF651-A95D-4E63-8056-D80125FB38B7, small LPT model

[   11.610000] mount_root: overlay filesystem has not been fully initialized yet

[   11.620000] mount_root: switching to ubifs overlay

[   11.640000] urandom-seed: Seed file not found (/etc/urandom.seed)

[   12.830000] procd: - early -

[ 13.590000] procd: - consume -

[   13.850000] random: ubusd: uninitialized urandom read (4 bytes read, 95 bits of entropy available)

[   13.980000] random: ubusd: uninitialized urandom read (4 bytes read, 96 bits of entropy available)

[   13.990000] random: ubusd: uninitialized urandom read (4 bytes read, 96 bits of entropy available)

[   14.000000] random: ubusd: uninitialized urandom read (4 bytes read, 96 bits of entropy available)

[ 14.020000] procd: - heat -

Please press Enter to activate this console.

[   14.650000] kmodloader: loading kernel modules from /etc/modules.d/*

[   14.690000] ip6_tables: (C) 2000-2006 Netfilter Core Team

[   14.740000] atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at c8b84000

[   14.750000] atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at d9100000

[   14.770000] i2c /dev entries driver

[   14.800000] usbcore: registered new interface driver cdc_acm

[   14.810000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[   14.820000] usbcore: registered new interface driver cdc_wdm

[   14.830000] ip_tables: (C) 2000-2006 Netfilter Core Team

[   14.860000] nf_conntrack version 0.5.0 (1949 buckets, 7796 max)

[   14.900000] usbcore: registered new interface driver r8152

[   14.930000] usbcore: registered new interface driver usbserial

[   14.930000] usbcore: registered new interface driver usbserial_generic

[   14.940000] usbserial: USB Serial support registered for generic

[   14.980000] xt_time: kernel timezone is -0000

[   15.000000] usbcore: registered new interface driver cdc_ether

[   15.010000] usbcore: registered new interface driver ch341

[   15.010000] usbserial: USB Serial support registered for ch341-uart

[   15.020000] usbcore: registered new interface driver cp210x

[   15.030000] usbserial: USB Serial support registered for cp210x

[   15.040000] usbcore: registered new interface driver ftdi_sio

[   15.050000] usbserial: USB Serial support registered for FTDI USB Serial Device

[   15.080000] usbcore: registered new interface driver pl2303

[   15.090000] usbserial: USB Serial support registered for pl2303

[   15.100000] PPP generic driver version 2.4.2

[   15.110000] NET: Registered protocol family 24

[   15.120000] usbcore: registered new interface driver qmi_wwan

[   15.130000] usbcore: registered new interface driver rndis_host

[   15.160000] usbcore: registered new interface driver ipw

[   15.160000] usbserial: USB Serial support registered for IPWireless converter

[   15.190000] kmodloader: 1 module could not be probed

[   15.190000] kmodloader: - at91_udc - 0

[   30.350000] device eth0 entered promiscuous mode

[   30.380000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready

[   31.820000] random: nonblocking pool is initialized


LEDE login: root

Password: 



BusyBox v1.25.1 () built-in shell (ash)


     _________

    /        /      _    ___ ___  ___

   / THE / | | | __| | __|

  /FROM/ | |__| _|| |) | _|

 /________/ THE |____|___|___/|___| lede-project.org

            OF /

      THE / ------------------------------------------------ -----------

     DE      /    Reboot (17.01-SNAPSHOT, r4046-beaa2ecc10)

    ________/    -----------------------------------------------------------


root@LEDE:~# 


In addition, the op kernels of versions 18.06 and 19.07 are in lzma compression format. Without modifying the Makefile, you need to compile a newer uboot and add support for lzma compression.

[1] [2]
Keywords:OpenWrt  compile  debug Reference address:AT91SAM9X25 AT91SAM9G25 OpenWrt compilation and debugging pitfalls

Previous article:At91sam9x25 CPU booting issue
Next article:AT91SAM9X modified MAC driver to add eeprom support Linux2.6.39

Recommended ReadingLatest update time:2024-11-15 23:49

stm32 in Keil5 debugging prompt: uvision IDE has stopped working
1 http://blog.csdn.net/qq_33259138/article/details/70224581 The phenomenon is that there is no problem in compiling and downloading the program, but after starting Debug, as soon as entering the C source code file, it crashes immediately. I found a solution on the forum. Copy your project, send it to a short path
[Microcontroller]
stm32 in Keil5 debugging prompt: uvision IDE has stopped working
Summary of the problem that stm8 cannot be debugged online
Problem Description: 1. Previously, I created a stm8 project A and used the stm8 library function to perform online single-step debugging. 2. Later, there is another project B. I forgot whether it was newly created or copied from project A. Anyway, the program will run wild when debugging online. It doesn’t run wi
[Microcontroller]
Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号