• You can log in to your eeworld account to continue watching:
  • LPWAN LoRaWAN 2
  • Login
  • Duration:5 minutes and 25 seconds
  • Date:2017/07/21
  • Uploader:老白菜
Introduction
The architecture of the Internet of Things is mainly divided into three layers:
1. Perception layer (Sensors and Sensor networks),
2. Network layer (3G/4G/5G communication network),
3. Application layer (cloud services for various applications).
Perception layer Mainly discusses various wired or wireless sensors (such as temperature, humidity, brightness, gyroscope, three-axis accelerometer, heartbeat, blood pressure, pulse, etc.) and how to construct sensor networks to transmit the data collected by the sensors It is a very challenging task for sensors to achieve low power consumption (high battery life), low cost, small size, long wireless transmission distance, etc. The network layer mainly discusses how to use existing wireless or wired networks to Effectively transmit the collected data, such as using existing 3G/4G wireless transmission technology, or future 5G wireless transmission technology, etc. The application layer mainly explores how various application fields use the results of big data analysis to provide feedback and Control sensors or controller adjustments, etc. Overall, the Internet of Things is a living ecosystem. Sensors collect data and transmit it back to the cloud processing center through mobile phones or other device networks. After analysis, the control information is It is passed back to the controller for various fine or delicate controls.
Unfold ↓

You Might Like

Recommended Posts

Ask: Change the format (length) of the data sent by the serial port
Hello everyone, the serial port program I am debugging now has no problem in sending and receiving simple data. For example, if I send "A", if it is displayed in ASCII code, I can receive "A" at the o
sunghx Embedded System
Design of automatic assembly line workpiece counting
Using a single-chip microcomputer and a sensor, the workpiece is conveyed in a single direction on the automatic belt conveyor. When the workpiece passes through the detection area, the sensor detects
122866320 MCU
Some issues with VxWorks development on 80C186EB!
I would like to ask if I want to use VxWORKS to develop on 80C186, should I use VxWORKS FOR PENTIUM? In addition, I have spent a lot of time searching on the Internet but I can't find the BSP for 80C1
louiswujg Real-time operating system RTOS
[Based on KW41Z intelligent parking management system] Second post: KW41Z performance learning
[b][color=#5E7384]This content is originally created by [size=3]陌路绝途[/size], a netizen of EEWORLD forum. If you need to reprint or use it for commercial purposes, you must obtain the author's consent
陌路绝途 NXP MCU
Stepper motor drive problem
Well, I made a ln298 and ln297 to drive a stepper motor, but when the clock goes into the 18th pin of my ln297, for example, a 40hz square wave, the a, b, c, d four-phase output of the ln297 is not a
luowei100 51mcu
Share multi-core DSP C6678 SRIO interface debugging notes
[size=4][color=#000000] The designed board has reached the SRIO debugging stage. On the board, one V6 and two 6678s are interconnected through 4XSRIO, without a switch in between, and finally the comm
Aguilera DSP and ARM Processors

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号