• You can log in to your eeworld account to continue watching:
  • 802.11ah - EDCA and HCCA
  • Login
  • Duration:12 minutes and 11 seconds
  • Date:2017/07/21
  • Uploader:老白菜
Introduction
The architecture of the Internet of Things is mainly divided into three layers:
1. Perception layer (Sensors and Sensor networks),
2. Network layer (3G/4G/5G communication network),
3. Application layer (cloud services for various applications).
Perception layer Mainly discusses various wired or wireless sensors (such as temperature, humidity, brightness, gyroscope, three-axis accelerometer, heartbeat, blood pressure, pulse, etc.) and how to construct sensor networks to transmit the data collected by the sensors It is a very challenging task for sensors to achieve low power consumption (high battery life), low cost, small size, long wireless transmission distance, etc. The network layer mainly discusses how to use existing wireless or wired networks to Effectively transmit the collected data, such as using existing 3G/4G wireless transmission technology, or future 5G wireless transmission technology, etc. The application layer mainly explores how various application fields use the results of big data analysis to provide feedback and Control sensors or controller adjustments, etc. Overall, the Internet of Things is a living ecosystem. Sensors collect data and transmit it back to the cloud processing center through mobile phones or other device networks. After analysis, the control information is It is passed back to the controller for various fine or delicate controls.
Unfold ↓

You Might Like

Recommended Posts

SVPWM Program
Does anyone have a program for a diode-clamped three-phase three-level converter SVPWM based on TI's TMS320F28335 chip?
lzx_18570633112 DSP and ARM Processors
TI C2000 interrupt service function
Interrupt service function:GPIOBankIntDisable(SOC_GPIO_0_REGS, 0); // Disable GPIO BANK 0 interrupt IntEventClear(SYS_INT_GPIO_B0INT); // Clear GPIO BANK 0 interrupt status ………………; //Execute a short i
Aguilera DSP and ARM Processors
Rumor has it that DJI is laying off 14,000 employees? PR Director: 14,000 in total
Reuters reported on August 17 that DJI Innovations, the world's largest drone manufacturer, is laying off about 14,000 employees, with sales and marketing departments being the focus of layoffs.At pre
eric_wang Talking
About GDDFU Mode Application
May I ask which series of GD chips have built-in DFU mode, and which need to write additional boot to implement DFU mode? The same applies to STM32? Thank you all!
ena GD32 MCU
Summarize the commonly used communication interfaces of microcontrollers
In embedded systems, on-board communication interfaces refer to the communication paths or buses used to connect various integrated circuits to other peripheral devices. The following are commonly use
可乐zzZ MCU
Considerations for using PMOS tube as power switch
Notes on using PMOS tube as power switch: When PMOS tube is used as power switch, the power is pulled down due to the too fast switching speed Istepped on a pit when designing the circuit recently, an
Jacktang Analogue and Mixed Signal

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号