• You can log in to your eeworld account to continue watching:
  • 6LoWPAN header compression example-II
  • Login
  • Duration:5 minutes and 5 seconds
  • Date:2017/07/21
  • Uploader:老白菜
Introduction
The architecture of the Internet of Things is mainly divided into three layers:
1. Perception layer (Sensors and Sensor networks),
2. Network layer (3G/4G/5G communication network),
3. Application layer (cloud services for various applications).
Perception layer Mainly discusses various wired or wireless sensors (such as temperature, humidity, brightness, gyroscope, three-axis accelerometer, heartbeat, blood pressure, pulse, etc.) and how to construct sensor networks to transmit the data collected by the sensors It is a very challenging task for sensors to achieve low power consumption (high battery life), low cost, small size, long wireless transmission distance, etc. The network layer mainly discusses how to use existing wireless or wired networks to Effectively transmit the collected data, such as using existing 3G/4G wireless transmission technology, or future 5G wireless transmission technology, etc. The application layer mainly explores how various application fields use the results of big data analysis to provide feedback and Control sensors or controller adjustments, etc. Overall, the Internet of Things is a living ecosystem. Sensors collect data and transmit it back to the cloud processing center through mobile phones or other device networks. After analysis, the control information is It is passed back to the controller for various fine or delicate controls.
Unfold ↓

You Might Like

Recommended Posts

Provide a variety of synopsys & cadence & mentor & magma, etc.
We can provide digitalanalog IP with ASIC design. Please contact us by email if you need it. 8bit 1T/2T/4T/12T MCU8bit RISC CPU16bit MCU32ibt RISC CPUAudio Echo Processor16/24 bit DSP Core - Interface
designlab Test/Measurement
Problems with the cracked version of proteldxp2004
Protel DXP2004 cracked version software, why when I make my own original device, there are many things missing. For example, there is no pin placement, and there is no new component command
cjx19840106 PCB Design
MSP430 MCU simulation example: LCD1602 liquid crystal display
1. Brief description of LCD1602 liquid crystal1. Character LCD LCD1602 displays characters: When using 1602 type LCD to display characters, three problems must be solved: generating the ASCII standard
火辣西米秀 Microcontroller MCU
[Decryption 14] Wireless remote control tank DIY based on 51 single chip microcomputer - wireless remote control handle
[align=center][size=4]>>>>>>>>>>2013-02-06<<<<<<<<<<[/size][/align][size=4] Today I will introduce you to the wireless handle of the remote control tank. In fact, this handle can not only be used on t
@ZiShi DIY/Open Source Hardware
Newbie seeking guidance Zigbee
We now have a requirement for two movable endpoints A and B to communicate with each other. We want to use Zigbee CC2530 to achieve this. So I would like to ask you a few questions. 1. Can point-to-po
nonames RF/Wirelessly
What does the hardware circuit of count=count+1; in Verilog look like?
Did you use the add module? How is the 1 at the end done? What difference would it make if count<=count+1; was used? I know one is blocking and the other is non-blocking. What I'm asking about is the
ganzhifang Embedded System

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号