Google Pixel 4a protective case revealed: rectangular single camera

      Recently, foreign media exposed the renderings of the protective case of Google's new mid-range model Pixel 4a, and the appearance of this eye-catching native Android benchmark phone was once again confirmed.

　　Judging from the renderings, the Pixel 4a adopts a rectangular single-camera design, with one camera, but it is arranged diagonally with the flash to form a rectangle. The single camera should be due to cost reasons, and the rectangular design is to fit the popular trend of rear-mounted rectangular design in 2020.

　　The Pixel 4a also uses a rear fingerprint recognition, which may also mean that it will use an LCD screen. In addition, the top of the Pixel 4a is also equipped with an extremely advanced 3.5mm headphone jack.

　　As for the size, the Pixel 4a may measure 144.2x69.5x8.2mm, and the thickness with camera is 9mm. In comparison, the iPhone 11 measures 150.9x75.7x8.3mm. The Pixel 4a is a whole circle smaller than the iPhone 11 and its size is closer to the iPhone 8 (traditional 4.7-inch iPhone).

　　In addition, according to previous reports, the Pixel 4a will adopt a hole-punch screen design. In other words, the Pixel 4a is a single-phone model with a 4.7-inch iPhone body and a full-screen design, which is very consistent with many people's imagination of the perfect iPhone SE2.

      As for the configuration, it should be nothing more than a Snapdragon 7 series processor. The Snapdragon 765G should be one of the most likely alternatives. However, there are still several months before the official release of Pixel 4a, so let us wait and see.