TLC2654AC-14D

Basic information of TLC2654AC-14D amplifier:

TLC2654AC-14D is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, SOIC-14

TLC2654AC-14D amplifier core information:

The minimum operating temperature of the TLC2654AC-14D is , and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00015 µA Its maximum average bias current is 0.00015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC2654AC-14D has a nominal slew rate of 2 V/us. The manufacturer specifies a maximum slew rate of 2.2 mA for the TLC2654AC-14D and a minimum slew rate of 1.3 V/us. Its minimum voltage gain is 3162277.7. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC2654AC-14D gain becomes 0.707 times the low-frequency gain is 1900 kHz. The TLC2654AC-14D has NO power. Its programmable power is NO.

The nominal supply voltage of the TLC2654AC-14D is 5 V, and its corresponding nominal negative supply voltage is -5 V. The power supply range is: +-5 V. The input offset voltage of the TLC2654AC-14D is 24 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC2654AC-14D:

The width of TLC2654AC-14D is: 3.9 mm and the length is 8.65 mm. TLC2654AC-14D has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 14

TLC2654AC-14D amplifier additional information:

TLC2654AC-14D adopts CHOPPER-STAB architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of TLC2654AC-14D is: YES. Its temperature grade is: COMMERCIAL.

It is not a micropower amplifier. The TLC2654AC-14D is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G14. The package code of TLC2654AC-14D is: SOP. The materials used in the TLC2654AC-14D package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. TLC2654AC-14D package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.