Lenovo S5 disassembly analysis: a true 1,000 yuan benchmark

　　Since the second half of last year, the full-screen trend has swept the mobile phone industry, and many manufacturers have launched new phones to seize the market. As one of the old domestic companies, Lenovo will naturally not be absent from this full-screen craze. When talking about Lenovo's mobile phones, many people think of smooth experience, long battery life, and excellent performance. Just a few days ago, its new phone Lenovo  S5 was officially unveiled and received wide acclaim as soon as it was released. Let's follow the mobile phone portable editor to learn about the relevant content.

The Lenovo  S5　　released this time is the "leader" among thousand-yuan phones in terms of both appearance design and user experience. For example, the more secure ZUI system and the more excellent dual cameras reflect Lenovo's sense of responsibility and strength as an international manufacturer. Many people think that these are just "showpieces" on the surface, so today we will disassemble a brand new Lenovo  S5 to see if it is consistent with its appearance.

　　Okay, without further ado, let’s walk into the “inner” world of Lenovo S5 and see how its workmanship is.

　　Lenovo S5 adopts an all-metal body design. Like other mobile phones with similar designs, first turn off the phone and remove the SIM card slot, then use a screwdriver to unscrew the two fixing screws at the bottom of the body.

　　Remove the SIM card tray

　　Unscrew the two fixing screws at the bottom of the body and use a pry pick to separate the screen from the body. However, you must be careful during this process. The back cover of Lenovo S5 is still relatively tight, and there is a rear fingerprint recognition cable connecting the body and the back cover. After removing the cable, the back cover is separated from the motherboard.

　　The back shell is connected to the fingerprint recognition cable

　　Rear fingerprint recognition cable

　　After removing the back cover, we can see the interior of the Lenovo S5, which adopts a classic three-section design, with the motherboard on the top, the sub-board on the bottom, and the battery in the middle. This process is very mature.

　　Lenovo S5 internal structure

　　Before removing the motherboard, remove the two cables.

　　Next, disassemble the front camera. Lenovo S5 uses a 16-megapixel front camera, supports 100-level beauty camera, and 24 real-time filters.

　　Lenovo S5 front camera location

　　Lenovo S5 front camera

　　Then we disassemble the rear camera. Lenovo S5 uses a rear 13-megapixel dual-camera combination with an F2.2 aperture. The black and white camera in the rear dual-camera can retain more details and layering, while the color camera is responsible for capturing colors. The two work together to make the photos clear and sharp.

　　Moreover, the Lenovo S5's rear dual camera supports background blur and depth of field refocusing functions, which can achieve depth of field effect.

　　Lenovo S5's rear dual camera

　　Lenovo S5 front and rear cameras

　　After disassembling the camera, we will disassemble the main board. Disconnect the main board and the sub-board, remove the antenna, and the main board will be separated. The main board is fixed to the body with a large number of screws, and the screws are also tightened. However, you must not be careless at this time. There are small clips in some places, so be careful when disassembling the main board.

　　Lenovo S5 motherboard front

　　Lenovo S5 motherboard back

　　Lenovo S5 also has remarkable hardware configuration, equipped with Qualcomm Snapdragon 625 chip, using advanced 14nm process, eight-core design, single-core frequency up to 2.0GHz, and supports 4K video shooting. The advantage of this chip is low power consumption and long battery life. Combined with 4GB of memory, it can make the phone process faster and run more smoothly.

　　It is worth mentioning that as a thousand-yuan phone, all important components of the Lenovo S5 motherboard are covered with shielding covers, and the workmanship is very conscientious.

　　Next, remove the sub-board. Like the main board, the sub-board also uses a metal protective cover. Unscrew the screws to see the true appearance of the sub-board.

　　Lenovo S5 Sub-Board

　　Lenovo S5 Sub-Board

　　Lenovo S5's 3.5mm headphone jack and Type-C port

　　The above is the complete disassembly process of Lenovo S5. Then we installed the phone. At the end of the installation, we found that the screen buckle of the phone was still very tight after disassembly. The phone can be turned on and used normally, and the camera function is intact. Finally, the disassembly family photo of Lenovo S5 is attached.

　　Summarize:

　　From the disassembly, the internal workmanship of Lenovo S5 is quite solid. Although it is a thousand-yuan machine, its details can be compared with the craftsmanship of flagship machines. It is not easy to pay such attention to the places that users cannot see. The more secure ZUI system, more excellent dual cameras and other features, coupled with such excellent workmanship, are truly a thousand-yuan benchmark. Thumbs up for Lenovo S5.

    The above is the introduction about Lenovo S5 disassembly analysis of portable mobile phones: a veritable benchmark for the thousand-yuan price range. If you want to know more related information, please pay more attention to eeworld. eeworld Electronic Engineering will provide you with more complete, detailed and updated information.