The AD82584F is a digital audio amplifier capable of driving a pair of 8Ω load speakers to 25W (BTL) and a 4Ω load speaker to 50W (PBTL), and no external heat sink or fan is required to play music. The AD82584F provides advanced audio processing functions such as volume control, 30 EQ bands, audio mixing, 3D surround sound, and dynamic range control (DRC). These are fully programmable through a simple I2C control interface. Robust protection circuits are provided to protect the AD82584F from damage caused by unexpected error operating conditions.
The all-digital circuit design of the AD82584F is more tolerant to noise and PVT (process, voltage, and temperature) variations than analog Class AB or Class D audio amplifiers implemented through analog circuit design. The AD82584F has no popping sound during instantaneous power on/off or mute/off switching due to its robust built-in anti-pop circuit.
AD82584F adopts TSSOP24L package specification, which is compatible with TAS5707 and TAS5711
Analog audio amplifier chip:
AD51652, AD52010, AD52080 are compatible replacements for TPA2010, TPA2011
AD52060 is a compatible replacement for TPA3110, AD52050 is a compatible replacement for TPA3136, AD51050B, AD52058C is a compatible replacement for TPA3110/TPA3136/TPA3138, TPA52068 is a compatible replacement for TPA3110, AD52090 is a compatible replacement for TPA3110, AD52095, AD52070.
Digital audio amplifier chip:
AD82587D, AD82010, AD87010, AD82050, AD82111, AD82120, AD82010 is compatible with TAS5805, AD82088/AD87088 is compatible with TAS5707/TAS5711/TAS5733M, AD82584F is compatible with TAS5707/TAS5711, AD82128 is compatible with TAS5805, AD85050, AD82129, AD83584D is compatible with TAS5711, AD83586B.
Digital to analog conversion: ADD2010, ADD2012.
Analog-to-digital conversion: AD12250A.
USB Audio: AD62556, AD62557.
Linear drive: AD22650 is compatible with DRV602/DRV603, AD22653B is compatible with DRV632, AD22654, AD22657B.
LDO (5V PMOS): EMP8150, EMP8130, EMP8965, EMP8110.
LDO (5V NMOS): EMP8161, EMP8166, EMP8160, EMP8165, EMP8170, EMP8175.
LDO (HV): EMP8042B, EMP8040B, EMP8041B, EMP8045.
Buck Converter: EML3380/EML3383 compatible replacement for RT8010/AP3417C/SY8088, EML3023, EML3320, EML3321, EML3322, EML3470, EML3193B, EML3290, EML3420/EML3421 compatible replacement for TPS54540, EML3350.
Boost converter: EMH7070, EMH7090.
Linear charging chip: EMC5754, EMC5755, EMC5040, EMC5042.
LED driver:EMD3001,EMD2050,EMD2055,EMD2095.
GATE drivers: EMD2A314, EMD2A341, EMD2A343.
Others: ET1511A, ET1511B, ETS75A are compatible and can replace LM75A/LM75B/TMP75/TMP175/ADT75.
Previous article:Replacement for NCS8823 chip solution | CS5260 completely replaces NCS8823 chip | Type-C to VGA low-cost solution
Next article:AD52058 supports 2x15W stereo Class-D audio amplifier, compatible with TPA3136/TPA3138/TPA3110
- Popular Resources
- Popular amplifiers
- Red Hat announces definitive agreement to acquire Neural Magic
- 5G network speed is faster than 4G, but the perception is poor! Wu Hequan: 6G standard formulation should focus on user needs
- SEMI report: Global silicon wafer shipments increased by 6% in the third quarter of 2024
- OpenAI calls for a "North American Artificial Intelligence Alliance" to compete with China
- OpenAI is rumored to be launching a new intelligent body that can automatically perform tasks for users
- Arm: Focusing on efficient computing platforms, we work together to build a sustainable future
- AMD to cut 4% of its workforce to gain a stronger position in artificial intelligence chips
- NEC receives new supercomputer orders: Intel CPU + AMD accelerator + Nvidia switch
- RW61X: Wi-Fi 6 tri-band device in a secure i.MX RT MCU
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- CGD and Qorvo to jointly revolutionize motor control solutions
- CGD and Qorvo to jointly revolutionize motor control solutions
- Keysight Technologies FieldFox handheld analyzer with VDI spread spectrum module to achieve millimeter wave analysis function
- Infineon's PASCO2V15 XENSIV PAS CO2 5V Sensor Now Available at Mouser for Accurate CO2 Level Measurement
- Advanced gameplay, Harting takes your PCB board connection to a new level!
- Advanced gameplay, Harting takes your PCB board connection to a new level!
- A new chapter in Great Wall Motors R&D: solid-state battery technology leads the future
- Naxin Micro provides full-scenario GaN driver IC solutions
- Interpreting Huawei’s new solid-state battery patent, will it challenge CATL in 2030?
- Are pure electric/plug-in hybrid vehicles going crazy? A Chinese company has launched the world's first -40℃ dischargeable hybrid battery that is not afraid of cold
- EK140P Linux-4.1.15 Test Manual
- EEWORLD University Hall----Live Replay: HARTING- How to quickly and cost-effectively install cables in electrical control cabinets
- Introduction to Machine Vision Technology
- 【RT-Thread Reading Notes】1. RT-Thread RTOS Preface
- I would like to ask about an EXCEL curve fitting formula. I cannot get the value of Y by substituting the values of X (0, 150, 300). The value of Y is not correct.
- EEWORLD University ---- Sensors and Testing Technology
- The first question after the New Year is how dare I use this IGBT driving current.
- Bluetooth module interfaces
- Five factors to consider when designing a fixed wireless access (FWA) system
- Weak Bluetooth signal strength and excessive static power consumption of the product