JLINK burns .hex file to LPC2214-EEWORLD

Collect

Development environment:

win7 JLINK V8 JLINK driver V4.56

Burning method:

1. Double-click to open J-Flash ARM V4.56

2、File-->open project...

The dialog box that pops up is as follows. If it is not installed by default, please pay attention to the installation directory and select LPC2214.jflash.

3、File-->open data file…

Add the .hex file you want to burn

4. Setting Options --> Project setting…

A pop-up window will pop up, and then set as shown:

5. Connect JILIN and power on the target board

6、Target-->connet

Pay attention to the red line, indicating successful connection.

7、Target-->Erase chip

Confirm erasure successful

7、Target-->Program

Confirm completion of .Hex file programming

Keywords：JLINK Reference address：JLINK burns .hex file to LPC2214

Previous article：PLL and timer settings of LPC2214
Next article：s3c2416 naked running environment configuration

Recommended ReadingLatest update time:2024-11-15 07:30

2440+jlink initialize SDRM

ADS project property settings: -ro-base = 0x30000000 entry 0x30000000 Init Section: 2440init.o Init An SDRAM initialization file needs to be loaded under AXD. 0x0000000 32 Setmem 0x4A000008 0xFFFFFFFF 32 Setmem 0x4A00001C 0x000007FF 32 Setmem 0x53000000 0x00000000 32 Setmem 0x56000050 0x000055AA 32 Setmem 0x4C000014 0

[Microcontroller]

Design and implementation of home intelligent terminal based on LPC2214 and μC/OS-II

Smart home refers to the use of advanced computer technology, network communication technology, and integrated wiring technology to organically combine the subsystems related to home life, and make home life more comfortable, safe, and effective through overall management. As an important part of the intellige

[Microcontroller]

Design and implementation of home intelligent terminal based on LPC2214 and μC/OS-II

STM32 uses Jlink to burn external Nor Flash

Tested using the STM32-5I development board: https://item.taobao.com/item.htm?spm=a230r.1.14.275.76bf523QxvMsK&id=557618550100&ns=1&abbucket=6#detail Development board PCB complete project link: http://www.cirmall.com/circuit/7 ... F%EF%BC%81#/details 1. Start - All Programs - SEGGER, open J-Flash under SEGGER whe

[Microcontroller]

Jlink debugging 2440 can not enter the interrupt, see here

Many people start learning 2440 from bare metal, starting with the basic LEDs, then the timers, buttons and other commonly used internal peripherals, and finally the complex peripherals such as LCD and Nand. When debugging 2440 applet with Jlink bare metal, interrupt debugging is an important part. Interrupts are re

[Microcontroller]

Use jlink+gdbserver+insight to debug ARM program--Configure insight

1. Download insight-6.8a.tar.bz2 and compile: ./configure --target=arm-linux --prefix=/opt/insight_arm --disable-werror (1) --target=arm-linux will affect the name of the executable file generated by the installation. For example, the name of the executable file after installation is: caodan@caodan-Ubunt

[Microcontroller]

Use jlink+gdbserver+insight to debug ARM program--Configure insight

Configuration of s3c2440.jflash project (download boot to norflash using jlink)

Configuration of J-Flash ARM. Generally speaking, you can find some *.jflash configuration files in file– open project, and just load them, but I didn't find any suitable for S3C2440. So I built a MINI2440.jflash and configured it manually: J-Link Settings 1. Open J-Flash ARM and go to the menu: Options– Project s

[Microcontroller]