INA321/INA322 amplifier circuit using feedback capacitor to improve dynamic characteristics
Source: InternetPublisher:ohahaha Keywords: Amplifier Circuit Updated: 2024/09/12
As shown in the figure, the INA321/322 amplifier circuit uses feedback capacitors to improve dynamic characteristics. Feedback capacitor CF is connected in parallel across the feedback resistor RF to compensate for the impact of the feedback resistor, RG input equivalent capacitance and circuit board stray capacitance on high-frequency signals, so that the circuit has the best fast stabilization time. The output terminal (pin 6) is connected to Rx and CL to reduce high-frequency noise. CIN is equivalent to the sum of the input capacitance (about 3pF) and stray capacitance of INA321/322. RIN·CIN=RF·CF.
- LED lights that “drain” battery power
- Homemade 100-base addition and subtraction counting circuit
- Symmetrical output three-way frequency circuit (74LS109, 74LS113)
- Simple and easy to make energy-saving LED flashlight
- 915MHz RF amplifier circuit composed of RF2103P
- Dual-channel amplifier circuit composed of LM4912
- Typical application circuit of LM4911 for dual-channel amplifier
- Load current measurement amplifier composed of INA117
- Precision current inverter/current source circuit composed of LOG101/LOG104 and op amp OPA2335
- 4-channel single-ended output amplifier circuit composed of TDA8580J
- Transistor voice control amplifier circuit
- Double tuned amplifierb
- Single tuned amplifier circuit
- Monolithic integrated centralized parameter pre-IF amplifier circuit
- Practical amplifier circuit b composed of operational amplifier LM386
- Practical amplifier circuit a composed of operational amplifier LM386
- Practical amplifier circuit f composed of operational amplifier LM386
- Practical amplifier circuit c composed of operational amplifier LM386
- Three amplification circuits of junction field effect transistors - common source
- Single tuned IF amplifier circuit for radio