The reason is that JTAG is already occupied, so of course you can't use JTAG to operate! At this time, you must ensure that the CPU does not enter the normal operating state before you can use JTAG.
Solution: options for target ---->Debug---->upper right ---->use the setting button behind------>change JTAG under Ort in the upper left to SW
Change to
Previous article:Problems encountered when STM32 USART receives data through DMA transmission
Next article:STM32 compilation configuration related errors
- Popular Resources
- Popular amplifiers
- Learn ARM development(16)
- Learn ARM development(17)
- Learn ARM development(18)
- Embedded system debugging simulation tool
- A small question that has been bothering me recently has finally been solved~~
- Learn ARM development (1)
- Learn ARM development (2)
- Learn ARM development (4)
- Learn ARM development (6)
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Wi-Fi 8 specification is on the way: 2.4/5/6GHz triple-band operation
- Wi-Fi 8 specification is on the way: 2.4/5/6GHz triple-band operation
- Vietnam's chip packaging and testing business is growing, and supply-side fragmentation is splitting the market
- Vietnam's chip packaging and testing business is growing, and supply-side fragmentation is splitting the market
- Three steps to govern hybrid multicloud environments
- Three steps to govern hybrid multicloud environments
- Microchip Accelerates Real-Time Edge AI Deployment with NVIDIA Holoscan Platform
- Microchip Accelerates Real-Time Edge AI Deployment with NVIDIA Holoscan Platform
- Melexis launches ultra-low power automotive contactless micro-power switch chip
- Melexis launches ultra-low power automotive contactless micro-power switch chip
- Condensing exclusive technology - Nichicon's on-board charger solution
- Relationship between 12-pulse rectifier input current harmonics and control angle
- Why is the instruction set of the microcontroller RISC but the structure is von Neumann structure? Shouldn't it be Harvard structure?
- Computer Architecture: An Embedded Approach
- The base address can already be distinguished, what is the point of adding an identical offset address?
- EEWORLD University ---- Haiwell IoT Cloud HMI Quick Start Video Tutorial
- MSP430FR6043 Ultrasonic Sensing Evaluation Module
- What are IoT programming tools?
- The pipes kept exploding, and finally the power supply was blown away.
- Verilog Golden Reference Guide Chinese Edition