Main technical parameters of hose wear resistance tester

Introduction to hose wear resistance tester

It is mainly used to measure the wear resistance of hydraulic hoses with fabric or steel wire reinforcements and smooth and flat surfaces and other similar hoses. This equipment meets the requirements of GB/T2721-2007/ISO6945:1991 and is specially designed to measure the outer layer of rubber hoses and other similar types of hoses with fabric or steel wire reinforcement layers and smooth and flat surfaces. Instruments with wear resistance. At the same time, the wear resistance of other pipes and plates (sheets) can also be measured. It is an indispensable testing instrument for rubber hose manufacturers, scientific research units, and quality inspection units.

Main technical parameters of hose abrasion testing machine:

Overall dimensions: 900X520X680 (length x width x height)

Weight: about 150 kg;

Power supply: AC 220V, 5A

Number of test groups: three groups or one group

Sample specifications: inner diameter 5, 8, 10, 13, 16, 19, 22, 25, 32, 38, 45, 51 mm, length 150 mm

Apply static pressure: 50 N, 100 N

Cycle times setting: up to 999999 times