[TI millimeter wave radar evaluation]_4_boost board evaluation encountered problems 2

wangran_95

[TI millimeter wave radar evaluation]_4_boost board evaluation encountered problems 2 [Copy link]

 

After using the device, I found that it was hard to find a power supply. There were two boards and two power supplies, so I had to carry a plug board with me at all times.

The power supply is not recommended...

The win10 system is incompatible, and the win7 system once caused the computer to blue screen. . .

Or attach the solution for win10

Some strange errors

This problem is theoretically a RS232 problem. You need to select the correct COM port.

In the above picture, you need to select COM4 port. Of course, sometimes you still get an error after changing it.

The only advice I can give is to try it a few more times...

The USB port and the power port have a slightly poor contact, the network port settings sometimes fail, and the computer and the capture card cannot transmit packets. . .

The document used is for your reference

The official documentation provided by TI is already very rich. During the debugging process, you just need to be patient and try it a few more times.

alan000345

Nice sharing.