Introduction: Allwinner V3S main control, board shape and screw holes compatible with Raspberry Pi
Introduction: 11111111111111111111111111111111111111
Introduction: Imitation microphase FPGA development board
Introduction: Based on Huawei Hongmeng Hi3861 module, implement a small robot dog
Introduction: Refer to https://oshwhub.com/AmateurEEWEI/Embedded-Linux-validation-board#P3 schematic design. Thank you for sharing.
In order to challenge the wiring speed, I did not pay too much attention to the rules.
Introduction: Printhead board designed for Voron
Introduction: v3s development board that can be powered by battery
Introduction: A cheap 3b mini expansion board. The USB part needs to be removed and re-soldered. All pin headers use 2.54mm bidirectional pin headers.
Introduction: Manually convert Zhihui Jun's QuarkN baseboard to Lichuang EDA file, schematic/design rules are available
Introduction: The EFR32MG21 USB Stick reference design is a low-cost IoT gateway development kit that uses Silicon Labs' wireless IoT chip to implement the gateway function on a Linux host with a USB port.
Introduction: F1C200s, ESP32 dual-core processing, twelve-legged robot
Introduction: V3s-based flight control board, onboard ICM20600/spl06/QMC6883, and a high-end FPGA (used to output PWM waves)