Two-Phase Power Meter Reference Design

As global energy consumption continues to grow, especially in the residential market, utility providers require increasingly accurate and cost-effective energy metering solutions. The Kinetis® M Series two-phase energy meter reference design meets these accuracy and cost requirements by providing a high-performance analog front end combined with an embedded programmable gain amplifier to improve the accuracy of energy measurements.

Schematic PCB

Totem Pole Bridgeless PFC Converter

This reference design demonstrates totem pole bridgeless power factor correction (PFC) using the MC56F83783, MC56F81xxx, or MC56F82748 digital signal controller (DSC).

Schematic PCB

KV46 Digital LLC Converter Reference Design

This provides a fully digital design of LLC resonant converter based on HVP-LLC. The HVP-LLC development board is part of the NXP® High Voltage Platform.

Combined with the HVP-KV46F150 control card, it provides a ready-made software development platform for a 250-watt power supply with an input voltage of 390V DC and an output of 12V/21A.

Schematic PCB

KV series quad-core motor control

Schematic PCB

LLC resonant converter with synchronous rectifier

This reference design demonstrates the implementation of an LLC resonant converter using the MC56F83783, MC56F81xxx, or MC56F82748 digital signal controller (DSC).

Schematic PCB

Three-Phase Power Meter Reference Design

The three-phase power meter reference design is used to measure and record active and reactive energy in directly connected three-phase networks. It is pre-certified to the European EN50470-1, EN50470-3, Class B and Class C, and IEC 62053-21 and IEC 62052-11 international standards for active energy class 2 and class 1 electronic meters.

Schematic PCB

KV Series Full-Bridge DC-DC Switched Mode Power Supply (SMPS)

The full-bridge DC-DC switch mode power supply reference design is based on V-Series MCUs and is intended to provide examples of power conversion applications. A full-bridge DC-DC converter is a transformer-isolated step-down converter. The full-bridge topology consists of a full-bridge inverter module, transformer, synchronous rectifier module and filter.

Schematic PCB

S08 sensorless BLDC control

Sensorless BLDC control at ultra-high supply voltages (up to 18 V) is often required in many applications such as drone ESCs and DC fans. This reference design is based on NXP's highly integrated 8-bit S08 microcontroller MC9S08SU8/16. With its compact design, the BLDC control board delivers outstanding performance at a very low cost.

Schematic PCB

Four-motor control development platform - Introduction

Schematic PCB

PX4 UAV flight management unit-RDDRONE-FMURT6

Schematic PCB

Circulation Pump Inverter Reference Design

This reference design introduces PMSM safe motor control software optimized for the dedicated HW HVP-MC3PH-LITE equipped with Kinetis V-series MCUs. The purpose of this reference design is to help customers develop motor control solutions with safety features for controlled heating systems, electric circulation pumps, water installations and other equipment used in industrial applications. The reference design hardware is targeted at circulating pump applications but can be reused in general three-phase motor control applications up to 60 W from 110 V to 230 V AC. The reference design hardware uses NXP's cost-optimized MCU MKV10Z32 with core M0+ and NXP high-voltage DC-DC converter TEA1721. Integrated power modules, surge circuitry, and single-shunt current sensing are also implemented. In the reference design software, sensorless PMSM control with IEC60730/IEC60335 Class B device safety is implemented, including MCU core, memory and peripheral testing, program flow inspection and other safety-related functions. Customers can reuse design reference manuals, schematics, firmware and manufacturing files to accelerate product design.

Schematic PCB

NavQPlus AI/ML supporting computer EVK, suitable for mobile robots, ROS, ground stations and cameras

Schematic PCB

Motor control design based on LPC860 MCU

This LPC860-based motor control reference design includes PMSM flux direction control and BLDC motor commutation control. LPC860 utilizes flexible timers and ADC modules to provide a complete set of peripherals required for motor control, making it suitable for home appliance applications with three-phase motors or multiple DC brush motors.

The motor control reference design uses the LPCXpresso860-MAX evaluation kit and the FRDM motor control development kit, which includes the FRDM-MC-LVPMSM and FRDM-MC-BLDC driver boards to drive the motor. The controller uses a Flextimer (FTM) to generate a PWM signal and utilizes NXP's RECESL control algorithm library to trigger the ADC in an interrupt to run the motor control algorithm after the ADC sampling is completed.​

S32K148 Automotive Telematics Box (T-Box)

Schematic PCB

S12ZVL32 RGB LED lighting reference design

K series hydraulic/pneumatic valve controller system

This valve controller system uses SB0800 octal valve controller IC with MCU and two power MOSFETs. The system can drive proportional and digital valves as well as system pumps. Monitoring and protection features protect the system from hazardous events such as short circuits, overcurrent or overvoltage, and other abnormal conditions.

S12G HVAC Control Reference Design

RDS12GHVAC is a reference design based on the 16-bit S12G ultra-reliable microcontroller. RDS12GHVAC consists of a central control board with a human-machine interface (HMI), a motor control board, a damper and a blower motor. It is used to realize the temperature, light, and humidity of automotive HVAC. and air quality sensing interface and configurable automatic climate control software algorithms to effectively control vehicle climate.

S12ZVM 12 V Electrical Fuel Pump (EFP) Reference Design

Schematic PCB

S32G2 Internet of Vehicles Reference Design

Schematic PCB

S32G3 Automotive Network Reference Design

Schematic PCB