WiCAN is a powerful CAN adapter based on ESP32-C3 that can be used for car hacking and general CAN bus development. It is available in two form factors: OBD-II and standard USB-CAN. The original firmware can interact directly with RealDash using Wi-Fi or BLE, which allows you to create custom dashboards with beautiful graphics. It is available for Android, iOS, and Windows 10. WiCAN connects to your existing Wi-Fi network and any device on that network, and it allows you to configure Wi-Fi and CAN settings through a built-in web interface. Both versions have a power saving mode that detects when the voltage drops below 13 V or other preset values. When this power saving mode is enabled, WiCAN is able to enter sleep mode, reducing the current consumption to less than 1 mA.
This is a fun electronic toy car that features power-ups! The author uses color sensors and magnetic switches to trigger fun tricks like acceleration, deceleration, and rotation. It draws a lot of inspiration from Mario Kart.
After a failed Kickstarter campaign, the author has now open-sourced the software, hardware, and mechanics.
A versatile LiDAR SLAM package. Supports various types of LiDAR sensors (mechanical, solid-state, etc.), 6-axis and 9-axis IMU, loose coupling and tight coupling, mapping and positioning, loop detection, etc.
With features like adaptive cruise control, driver monitoring, automatic lane centering, etc., it is available for Toyota, Hyundai, Honda and many other brands, about 275+ models. openpilot complies with ISO26262 guidelines.
This reference design board supports the NXP® MM912_P812 engine control IC, which combines an MCU (S12P) and an analog control chip (MC33812), and is suitable for motorcycles and other single/double-cylinder small engine control applications.
The analog control IC consists of three integrated low-side drivers, a pre-driver, a +5.0 V voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface and a parallel interface for MCU communication.
The archived content will no longer be updated and is for historical reference only.
The NXP WCT-15WAUTO13 multi-coil transmitter reference platform is the first Qi® 1.3 certified 15W reference design for in-vehicle wireless charging applications based on the NXP MWCT2xx3A controller IC family. The system supports 40W power output to meet all customized fast charging needs.
The platform uses automotive-grade components and other critical automotive features, including EMC optimization, safety features and MISRA C compliance software, and is flexible to ensure seamless system integration. Complies with the Wireless Power Consortium's latest Qi v1.3 specification (including authentication) and is certified as MP-A13 transmitter type.
The NXP® 15 W multi-coil transmitter reference platform is designed for AutoSAR automotive wireless charging applications based on the NXP MWCT101xS controller IC family. The platform uses automotive-grade components and other critical automotive features, including AUTOSAR software and drivers, to ensure the system can be integrated seamlessly. Complies with the latest Qi® specification from the Wireless Power Consortium and is MP-A9 transmitter type certified.
The aim of the design was to replace the existing mechanical switches for ventilation position, blower speed and temperature control with an interactive LCD based system to extend the life and robustness of the system. The system can handle events via a capacitive touchpad interface (controlled via NXP's proximity capacitive touch sensor controller PT60), an infrared remote control (available for the convenience of rear-seat passengers) or microswitches.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
