This reference design provides design guidance, data, and other content for a 3-phase multilevel inverter with 5-level output. It uses 150V MOSFET to drive AC 200V motor.
This reference design provides design guidance, data and other content for a 4kW 3-phase AC 400V input PFC converter using a 3-phase totem pole topology and 1200V SiC MOSFETs.
This reference design provides application circuit and simulation examples of the TPD7106F, whose features include power supply reverse connection, charge pump circuit, etc.
This reference design provides design guidance, data and other content for a 1.6kW 48V output power supply using semi-bridgeless PFC and isolated phase-shifted full-bridge DC-DC converters.
This reference design provides design guidelines, data, and more for a 1kW server power supply using a phase-shifted full-bridge DC-DC converter.
This reference design provides design guidelines, data and other content for a 5kW isolated bidirectional DC-DC converter using a 1200V SiC MOSFET dual active bridge (DAB) conversion method.
This reference design provides design guidelines, data and other content for a constant current 100W power supply for LED lighting with PFC and wide input voltage range (i.e. AC 90V to 264V).
This reference design provides design guidelines, data, and other content for a 500W server power supply using continuous current mode PFC and LLC DC-DC converter. Using TOLL packaged MOSFETs in the PFC circuit reduces the overall size and increases power density.
This reference design provides design guidelines, data, and more for the smart gate drive coupler evaluation board.
This reference design provides design guidance, data, and other content for LED matrix headlights. It independently controls the lighting of multiple LEDs according to the situation.
This reference design provides design guidance, data, and other content for multiple non-isolated step-down DC-DC converter power supplies. A variety of power supplies are optimized for a variety of outputs, loads, and board mounting areas.
This reference design provides design guidance, data, and other content for a 200W active-clamp forward DC-DC converter using N-channel MOSFETs as clamp switches.
This reference design provides design guidelines, data, and other content for an IH induction cooker inverter circuit based on voltage resonant soft switching.
This reference design provides design guidelines, data, and more for a 100W LLC DC-DC converter using LLC resonance to achieve zero voltage switching.
In this reference design, a power multiplexer circuit with 2 inputs and 1 output is implemented on a small printed circuit board (PCB). Using MOSFET gate drive circuit ICs, eFuse ICs, Zener diodes, and small package MOSFETs selected from Toshiba's various product lines, an ideal diode with BBM and MBB switching is created.
This reference design provides design guidelines, data, and other content for a DC 300V input BLDC motor Hall-less control circuit using intelligent power devices. It implements vector control using an MCU designed specifically for motor control.
This reference design provides design guidelines, data, and more for a 1.6kW AC-DC converter power supply using a T-type three-level power factor correction (PFC) circuit.
Application circuit of low-power operational amplifier TC75S102F suitable for various sensors. These application circuits can be used in devices requiring long battery life, IoT sensors, energy harvesting systems, and more.
Features: low voltage drop, fast response, high ripple suppression ratio
1U rack size and high-efficiency power supply Total efficiency: 93% (Vin = 230V at 100% load) Dimensions: 240mm × 135mm × 40mm Suitable power devices (MOSFETs and SiC diodes) and optocouplers are available