The MAXREFDES1206 is a Power over Ethernet (PoE) powered device and active clamp forward converter that delivers up to 1A at 24V from a 39V to 57V supply voltage.
This reference design boosts a single-cell battery voltage to a 10W output using the MAX669 controller in the bootstrapped mode.
MAXREFDES1255 is a 4-switch buck-boost converter that gives a positive step-up/stepdown output voltage.
The MAXREFDES1219 is an integrated smart solution for the 1-cell Li+ battery pack that provides a linear charger
The DS28E18 is an easy-to-use bridge integrated circuit (IC) that operates as a 1-Wire® slave device to a host controller.
The MAXREFDES1274 is a buck converter using the MAX17501F high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs and internal compensation.
The MAXREFDES1275 has three main blocks: the microcontroller, ADC/DAC IC MAX11311, and three LED drivers.
The MAXREFDES1247 is a miniature, 12V output, isolated power supply that can deliver up to 1A of load current.
The MAXREFDES1265 is a reference design showcasing the MAX7360 and MAX32625PICO with a low-cost, small-size keypad interface.
The MAXREFDES1277 reference design enables quick evaluation of the MAX17852/53 for 48V two-Wheeler battery management applications (BMS)
The MAXREFDES1263 is a reference design for the TWS (True Wireless Stereo) application base.
The MAXREFDES1213 is a reference design showcasing the MAX32630FTHR and MAX11311, as well as several other Maxim products, that demonstrates a small size, low-cost, portable electronic load (E-load) for testing power converters and PMICs.
The requirements for higher quality and performance in digital SLR cameras, DSC, and other 2S Li+ battery electronic equipment is increasing.
This reference design boosts a single-cell battery voltage input to a 10W output using the MAX16990 controller in bootstrapped mode.
The MAX16990 is a high-performance, current-mode, pulse-width mode (PWM) controller with 4μA (typ) shutdown current for wide input-voltage range boost converters/single-ended primary-inductor converters (SEPIC)
The MAXREFDES1273 is a Power-over-Ethernet (PoE) powered device (PD) and an active clamp forward DC-DC converter (ACFC) that delivers up to 850mA at 48V from 39V to 57V supply voltage
The MAXREFDES9001 is a complete Internet-of-Things (IoT) security reference design featuring a LoRa radio based
The MAXREFDES1209 operates over a 14V to 60V input voltage range to deliver output voltage regulated at 12V and up to 500mA of load current.
The MAX17596 is a peak-current-mode controller for designing the wide input-voltage flyback regulators.