Abstract: This paper introduces the bootstrap design and application of the IDMA interface of the ADSP-218X series DSP chip. In terms of hardware, it introduces the characteristics of the IDMA interfa
I have always wanted to learn about electronics. Fortunately, I found Du Yang's books on the Internet and began to learn about single-chip microcomputers. I bought some materials on Wanneng Taobao and
In the above, our driver is placed in the directory of the kernel source code and compiled into a driver module. In many cases, weget a driver source code and do not need to put it in the kernel sourc
[i=s]This post was last edited by QWE4562009 on 2022-5-16 18:34[/i]Diodes and PotentialsIf the negative pole of VD3 is 1.2V and R1 is disconnected, then is the voltage at point A 1.2V plus the voltage
When a black line is detected, it is 1; #include
#include
#define uchar unsigned char
#define uint unsigned intsbit REDR1=P1^0;
sbit REDR2=P1^1;
sbit REDL2=P1^2;
sbit REDL1=P1^3;sbit ZUO_IN1=P1^4;
sbi
Application of C language in single chip microcomputer development[ Print ][ Return ]In the development and application of single-chip microcomputers, high-level languages have gradually been introduc