[font=微软雅黑][size=3]Before registering, please read these Terms of Service carefully. If you register successfully, you will be deemed to have voluntarily accepted all the contents of these Terms of Se
For those of you who have experience using i2c, there is currently a case where you need to use i2c to write and read the adc value. Test it before the component comes back. Currently, the loopback mo
1. Composition of GPRS three-meter centralized meter reading and control system The master station reads, monitors and controls the metering data and related information of multiple wireless meters th
I saw a post on the maple forum about converting the output frequency and tested it:)
/* QuickererPin :-) * * Turns a GPIO pin on and off fast using direct updates. * Copyright 2010 G Bulmer */
// #in
I wrote a program to divide the FPGA 50MHZ into 1HZ, but it seems not right. Can you help me find what is wrong? reg[22:0] counter; reg[1:0] clkout; always @(posedge clk) begin if(counter==25_000_000)
What are the differences between Cortex-A8 and ARM11 as two classic cores of ARM? Let's take a brief look at them: Cortex-A8 is a microprocessor based on ARMv7 instruction architecture, running at sp