I need help. When I modified the program, I called a new function, so I added a new file. However, after adding, only the .c file was successfully added, and the .h file could not be added. Moreover,
[i=s]This post was last edited by Xinhangxian Paotang on 2017-4-12 11:01[/i] [align=center][color=#000][size=15px][size=5][b]Altera SOPC Embedded System Design Tutorial[/b][b]Chapter 1 Overview[/b][/s
There are many file systems for front-end flash, and the most commonly used one is JFFS2 file system. The JFFS2 file system based on NOR flash can be said to be relatively mature, and JFFS2 supporting
[size=4]Push-pull output: can output high and low levels, connect digital devices; push-pull structure generally refers to two transistors controlled by two complementary signals, and one transistor i
The last section of the datasheet gives a reference design, where the bandwidth requirement is 20Hz-20kHz ±0.25dBIn the last two paragraphs, it is written about how the bandwidth requirement is achiev