I added a FIR ip core, but the modelsim simulation always outputs 0. The parameter settings are as follows The call is as follows fir50order myFIR( .clk(clk), .reset_n(rst_n), .ast_sink_valid(1'b1), .
LM3S9B96 is locked! According to LM Flash Programmer, select LM3S9B96 in the Quick Set column of the Configuration option page, then select "Fury and DustDevil Classes" in the Debug Port Unlock box of
Please follow the recommended sequence of steps below to resolve power / load circuit stability issues:
1. Remove as many capacitors as possible from the test fixture and across the DUT .
2. Use Teflo