• You can log in to your eeworld account to continue watching:
  • Analysis and testing of PIO Demo
  • Login
  • Duration:1 hours and 57 minutes and 13 seconds
  • Date:2018/08/23
  • Uploader:老白菜
Introduction
keywords: Linux Xilinx zq

This tutorial explains the basics of FPGA, introduction to SOC, DMA and VDMA, linux, HLS images and PCIE

Suitable for the following applications:

High-speed communications; machine vision, robots; servo systems, motion control; video collection, video output, consumer electronics; early stage verification of project research and development; learning for developers in electronic information engineering, automation, communication engineering and other electronic related majors

Unfold ↓

You Might Like

Recommended Posts

2014 Anhui Electric Competition Device Analysis and Forecast
Is there any expert who can help me analyze the direction of the 2014 Anhui Provincial Electrical Competition through devices? Thank you
singer993 Electronics Design Contest
TLP3547 Review
Previously, in the project test, it was necessary to cut off the power supply at a fixed time to verify the product's 200ms power-off switching capability. At that time, a 2A/DC 30V relay (Omron) was
youzizhile Toshiba Photorelays TLP3547 Review
Win10 system blue screen troubleshooting
As shown above, the laptop model is Dell 7490, and the system is Win10. Recently, this interface has appeared frequently, and there is no change at 0%. I can only force shutdown. I have uninstalled al
UUC Test/Measurement
Use of AD9852
[i=s] This post was last edited by paulhyde on 2014-9-15 09:14 [/i] Hi everyone, I am now debugging the AD9852 board, which is controlled by cpld, but the waveform cannot be output. I checked and foun
3971775 Electronics Design Contest
What should I do if I lose my car keys?
At present, all cars use the same starting method—the ignition switch is used to connect the power supply to start the motor, and then start the engine. However, the control switch method varies accor
movingtek Automotive Electronics
Huawei employees detail the inside story of overtime at Huawei: It is unrealistic not to work overtime at Huawei
One week after Huawei employee Hu Xinyu passed away, on the evening of June 5, a Huawei employee was finally willing to stand up and tell the true situation of Huawei's overtime. It can be seen that t
zz123 Talking

推荐文章

Linux内核分析:uboot与Linux内核机器码分析 2025年01月16日
1. uboot机器码 在uboot启动的start_armboot阶段,调用board_init函数初始化机器码。 int board_init(void) { .............................. gd- bd- bi_arch_number = MACH_TYPE_SMDKV210; gd- bd- bi_boot_params...
Linux内核的中断机制 2025年01月16日
1. 中断简介 中断是指在CPU正常运行期间,由于内外部事件或由程序预先安排的事件引起的CPU暂时停止正在运行的程序,转而为该内部或外部事件或预先安排的事件服务的程序中去,服务完毕后再返回去继续运行被暂时中断的程序。Linux中通常分为外部中断(又叫硬件中断)和内部中断(又叫异常)。 2. Linux内核中断机制的初始化 2.1 相关数据结构 linux内核将所有的中断统...
Linux内核静态映射表的建立过程 2025年01月16日
/* * 平台: s5pv210 * 内核版本号: 2.6.35.7 */ kernel/arch/arm/mach-s5pv210/mach-smdkc110.c 这个文件是由三星在移植内核时提供的一个很重要的文件,这个文件中的函数都是与硬件相关的。 mach-smdkc110.c文件中的smdkc110_map_io函数就是静态映射表建立过程调用的一个函数...
Linux驱动入门(七)使用定时器消除按键抖动 2025年01月16日
一、为什么要消抖? 二、如何消抖? 三、Linux内核定时器 四、源码 五、测试 本文将在Linux驱动入门(五)阻塞方式实现按键驱动的基础上,使用定时器消除按键抖动 一、为什么要消抖? 对于没有做硬件消抖的按键,在按下按键到电平稳定期间,会有一段抖动,此时电平会在高电平和低电平不断地跳动 如果我们的按键中断采用下降沿触发,从图中可以看出有多段下降沿,那么想必按下一次按键...

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号