• You can log in to your eeworld account to continue watching:
  • DMA_PL_LWIP
  • Login
  • Duration:33 minutes and 4 seconds
  • Date:2018/08/23
  • Uploader:老白菜
Introduction
keywords: Linux Xilinx zq

This tutorial explains the basics of FPGA, introduction to SOC, DMA and VDMA, linux, HLS images and PCIE

Suitable for the following applications:

High-speed communications; machine vision, robots; servo systems, motion control; video collection, video output, consumer electronics; early stage verification of project research and development; learning for developers in electronic information engineering, automation, communication engineering and other electronic related majors

Unfold ↓

You Might Like

Recommended Posts

Issues to be aware of when using the 485 bus
Check the data to see that the main issues that need to be paid attention to in the 485 bus are as follows: 1. Error state protection: that is, use pull-up and pull-down resistors to maintain the idle
123456ZJ Embedded System
How to access the camera data on the laptop
I want to access the image data of a camera on my laptop, such as RGB values, to do some research on image processing. But I don't know how to access this data, nor do I know where there is a related
hzhanhai Embedded System
When using 430 MCU as ADC, only channel 0 is OK in single channel measurement, while other channels are not accurate. What is the problem?
RT:430 MCU is used as ADC. Only channel 0 is OK in single channel measurement. Other channels are not accurate. What is the problem? It is really a headache. Only channel 0 is accurate. Any other chan
qq4988 Microcontroller MCU
Problems sending MMS
Hello everyone, I am now using HTTP1.1 protocol to send MMS, I just need to combine an HTTP header and MMS PDU. But now the HTTP header always replies with 400 error, and returns 200OK without adding
HHY55 Embedded System
The evil FSMC driving LCD (ILI9341 controller) detailed explanation
[b][url=http://www.amobbs.com/thread-5493735-1-1.html][color=#0066cc]The evil FSMC driving LCD (ILI9341 controller) detailed explanation[/color][/url] Wildfire dedication[/b]
wangbin65530 stm32/stm8
Project Navigator Window
I accidentally made the project navigator window float, and I can't accept it because of my obsessive-compulsive disorder, but I don't know how to change it back. I urgently need someone to teach me h
zhenpeng25 FPGA/CPLD

推荐文章

Linux内核分析:uboot与Linux内核机器码分析 2025年01月16日
1. uboot机器码 在uboot启动的start_armboot阶段,调用board_init函数初始化机器码。 int board_init(void) { .............................. gd- bd- bi_arch_number = MACH_TYPE_SMDKV210; gd- bd- bi_boot_params...
Linux内核的中断机制 2025年01月16日
1. 中断简介 中断是指在CPU正常运行期间,由于内外部事件或由程序预先安排的事件引起的CPU暂时停止正在运行的程序,转而为该内部或外部事件或预先安排的事件服务的程序中去,服务完毕后再返回去继续运行被暂时中断的程序。Linux中通常分为外部中断(又叫硬件中断)和内部中断(又叫异常)。 2. Linux内核中断机制的初始化 2.1 相关数据结构 linux内核将所有的中断统...
Linux内核静态映射表的建立过程 2025年01月16日
/* * 平台: s5pv210 * 内核版本号: 2.6.35.7 */ kernel/arch/arm/mach-s5pv210/mach-smdkc110.c 这个文件是由三星在移植内核时提供的一个很重要的文件,这个文件中的函数都是与硬件相关的。 mach-smdkc110.c文件中的smdkc110_map_io函数就是静态映射表建立过程调用的一个函数...
Linux驱动入门(七)使用定时器消除按键抖动 2025年01月16日
一、为什么要消抖? 二、如何消抖? 三、Linux内核定时器 四、源码 五、测试 本文将在Linux驱动入门(五)阻塞方式实现按键驱动的基础上,使用定时器消除按键抖动 一、为什么要消抖? 对于没有做硬件消抖的按键,在按下按键到电平稳定期间,会有一段抖动,此时电平会在高电平和低电平不断地跳动 如果我们的按键中断采用下降沿触发,从图中可以看出有多段下降沿,那么想必按下一次按键...

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号