Today, OPPO confirmed that it will hold a press conference on April 24 to release the OPPO K10 series. The lineup will include two models, OPPO K10 5G and K10 Pro 5G.
OPPO K10 uses a perforated screen and offers a refresh rate of 120Hz. The device is equipped with a Dimensity 8000 Max chip and is equipped with a VC liquid cooling system for heat dissipation. It will also be equipped with an X-axis linear motor.
The K10 Pro 5G is also equipped with a punch-hole screen. However, the official website currently has no information about its size, resolution, and refresh rate.
Internally, it is powered by the Snapdragon 888 SoC and a 5,000mAh battery with support for 80W SuperVOOC charging.
Previous article:vivo S15e release date confirmed: debut on April 25
Next article:vivo X80 and X80 Pro main configurations exposed: What are the differences between the two models?
Recommended ReadingLatest update time:2024-11-15 21:09
- Apple faces class action lawsuit from 40 million UK iCloud users, faces $27.6 billion in claims
- Apple and Samsung reportedly failed to develop ultra-thin high-density batteries, iPhone 17 Air and Galaxy S25 Slim phones became thicker
- Micron will appear at the 2024 CIIE, continue to deepen its presence in the Chinese market and lead sustainable development
- Qorvo: Innovative technologies lead the next generation of mobile industry
- BOE exclusively supplies Nubia and Red Magic flagship new products with a new generation of under-screen display technology, leading the industry into the era of true full-screen
- OPPO and Hong Kong Polytechnic University renew cooperation to upgrade innovation research center and expand new boundaries of AI imaging
- Gurman: Vision Pro will upgrade the chip, Apple is also considering launching glasses connected to the iPhone
- OnePlus 13 officially released: the first flagship of the new decade is "Super Pro in every aspect"
- Goodix Technology helps iQOO 13 create a new flagship experience for e-sports performance
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- The story I have to tell about Yatli+!
- Misuse of "termination" will cause signal failure
- Raspberry Pi Pico is out~ I originally said that I would not review it before the New Year, but I am here to recommend this board to you~~
- PyBoard W5500 firmware compilation issue
- Discussion and help
- "Playing with the board" + lighting up the SPI touch screen of Xintao
- &FF0000 and &880000 are both red. What is the difference between these two reds?
- Internet radio design based on RSIC-V RVB2601 (3)
- LIS2MDL three-axis magnetometer package and code
- Live broadcast with prizes: Enter the TI robot production class, starting on Friday, reservations are in progress! (Share 100% to get gifts)