Tiansicai Optoelectronics LED and sensor packaging manufacturing, Sanjie Digital LCD display module production and other projects signed in Ganzhou-EEWORLD

Collect

On the morning of February 28, the Ganzhou Economic and Technological Development Zone in Jiangxi Province held a signing ceremony for the third batch of investment promotion projects in 2022. Ten projects were signed on the spot with a contract value of 8.6 billion yuan.

The projects signed this time include the new energy power battery production project of Dongguan Wotaitong New Energy Co., Ltd., the cloud-based intelligent agricultural robot project of Dahua Robotics Co., Ltd., the LED and sensor packaging manufacturing project of Shenzhen Tiansicai Optoelectronics Technology Co., Ltd., the LCD display module production project of Dongguan Sanjie Digital Technology Co., Ltd., the cable machinery and equipment production project of Dongguan Qinzheng Machinery Co., Ltd., and the annual production of 400 sets of non-ferrous metal separation and smelting intelligent complete equipment production project of Ganzhou Xike Energy Saving Automation Equipment Co., Ltd.

Among them, the LED and sensor packaging manufacturing project of Shenzhen Tiansicai Optoelectronics Technology Co., Ltd., with a total investment of 1.5 billion yuan, is mainly engaged in the research and development, production and sales of LED products such as LED outdoor display pixel tubes and LED lighting fixtures. After the project reaches full production and meets the standards, it can achieve an annual operating income of 1.6 billion yuan and an annual tax payment of 25 million yuan.

Dongguan Sanjie Digital Technology Co., Ltd.'s LCD display module production project, with a total investment of 1.4 billion yuan, is mainly engaged in the research and development, production and sales of various types of LCD screens, such as TN segment LCD screens and VA segment LCD screens, large-panel LCD panels and smart terminal products. After the project reaches full production and meets the standards, it can achieve an annual operating income of 1 billion yuan and exports of more than 600 million yuan.

Keywords：led Reference address：Tiansicai Optoelectronics LED and sensor packaging manufacturing, Sanjie Digital LCD display module production and other projects signed in Ganzhou

Previous article：TCL 360度折叠屏概念机内折外折都可以
Next article：Honor CEO Zhao Ming: The foldable phone market will grow 10 times this year

Recommended ReadingLatest update time:2024-11-15 08:13

51 MCU review: 8*8 LED dot matrix

There are two types, one is low voltage for the columns and high voltage for the rows. We can connect each column to low voltage in turn, and they will light up in turn. Then use the voltage of the row to control the lighting. If the voltage of one row is low, the LED lights of that row will not light up. The second

[Microcontroller]

Synchronous buck switching power supply driving LED array

background Automotive lighting assembly suppliers are considering using LED devices to compete with high-intensity discharge (HID) lighting. First, the driving circuits of LED devices are less complex than HID lamps. HID lamps require high-voltage ballast circuits to start an arc in the HID lamp, and after the arc i

[Power Management]

Nine performance characteristics of LED driver power supply

According to the power consumption rules of the power grid and the characteristics of LED driver power supply, the following nine performance characteristics should be considered when selecting and designing LED driver power supply: 　　1. High reliability, especially for the driver power supply of LED street lamps

[Power Management]

Design of wind-solar hybrid LED lighting controller based on new substrate packaging technology

1 Introduction At present, the wind-solar hybrid system is developing rapidly, and there are many types of wind-solar hybrid controllers, but there are not many systems that can really achieve economic efficiency, reliability and safety. One of the main reasons is that there is no good control system. The wind-solar h

[Power Management]

Design of wind-solar hybrid LED lighting controller based on new substrate packaging technology

LED Flashing

What does flickering mean? It means turning on for a while, turning off for a while, and then turning on again for a while. Obviously, this is a loop structure, and there should be code for turning on for a while and code for turning off for a while in the loop. It is very simple to turn on, just give the correspond

[Microcontroller]

Application of MOS tubes in automotive LEDs

LED automotive lights use LED technology to provide exterior lighting and a comfortable light source. Challenges such as thermal limits and EMC need to be addressed in the design. Active ripple compensation Buck circuits are key to improving the reliability and life of LED driver power supplies. Selecting the right

[Embedded]

Application of MOS tubes in automotive LEDs

STM32 Practice 1: Press the button to light up the LED

Theoretical knowledge has been learned, and then we will enter the practical part. In the practical learning, I completed the first project and lit up the LED light with a button. The following is my program LED main program #include "sys.h" #include "led.h" void LED_Init(void) { GPIO_InitTypeDef GPIO_InitStructure; R

[Microcontroller]

Comprehensive interpretation of LED lamp characteristics and standards

　　This article takes LED lamps, luminaires and their current status as the entry point, analyzes the characteristics and current problems of LED lamps based on the relevant definitions of LED lamps and luminaires, and compares them with traditional lamps in terms of performance, evaluation and design. At the same time

[Power Management]