AVR microcontroller (ATMEGA16) DS1302 clock chip program

Publisher:Meilin8888Latest update time:2022-07-14 Source: csdn Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

Previous article:AVR MCU Practice--ATmega16 button control water lamp
Next article:The simplest button program for Atmega32

Recommended ReadingLatest update time:2024-11-16 16:49

ATmega16 ADC Noise Suppression Mode
When SM2..0 is 001, the SLEEP instruction will put the MCU into noise suppression mode. In this mode, the CPU stops running, while the ADC, external interrupts, two-wire interface address configuration, timer/counter 0 and watchdog continue to work. This sleep mode only stops clkI/O, clkCPU and clkFLASH, and other clo
[Microcontroller]
ds1302 clock chip source code
;********************************************************************* ; Revision History: ;********************************************************************* ;--------- Pin Definition-------------- RST EQU P1.5 ;DS1302 IO EQU P1.6 SCLK EQU P1.7 ;********************************************************************
[Microcontroller]
AVR microcontroller (ATMEGA16) serial transceiver program
#include iom16v.h       #include macros.h    #define uchar unsigned char   #pragma interrupt_handler SerialService:12   float rtemp,sflag;   void SerialInit(void)   {    UCSRB=(1 RXCIE)|(1 RXEN)|(1 TXEN); //Set the receive end interrupt enable, receive enable, transmit enable, and other bits to 0    UCSRC=(1 URSEL)|(1
[Microcontroller]
AVR microcontroller (ATMEGA16) serial transceiver program
GSM Home Security Alarm Based on ATmega16
Abstract: At present, people have an increasing demand for home fire prevention, anti-theft and remote control of household appliances. At the same time, mobile phones have become a communication tool that residents carry with them. Based on this, an automatic SMS security alarm system based on the GSM module is des
[Power Management]
GSM Home Security Alarm Based on ATmega16
Single chip perpetual calendar (LCD12864, DS18B20, DS1302)
1. Introduction This circuit consists of AT89C51 minimum circuit board, LCD12864 display module, DS18B20 temperature module and DS1302 clock module. The main functions are: display real time and current temperature. 2. Operation Effect 3. Partial Code /*Want more projects private wo!!!*/ #include reg51.h #inclu
[Microcontroller]
Single chip perpetual calendar (LCD12864, DS18B20, DS1302)
Design of Intelligent Temperature Controller for Dry-Type Transformer Based on ATmega16 Single Chip Microcomputer
1 Working Principle The temperature controller consists of three parts: temperature monitoring, signal processing, and output control. The system block diagram is shown in Figure 1. It obtains the winding temperature value through three platinum resistance sensors embedded in the three-phase winding of th
[Microcontroller]
Design of Intelligent Temperature Controller for Dry-Type Transformer Based on ATmega16 Single Chip Microcomputer
ATmega16 read and write 24Cxx program
/**************************************************           EEPROM read and write operation     crystal: internal 8M ******************************************************/ #include iom16v.h #include macros.h #define uchar unsigned char  #define uint unsigned int  #define ulong unsigned long  uchar syserr; void de
[Microcontroller]
DS1302 - Demo Code
I referred to the DS1302 data sheet, which was in English but very helpful. I combined it with many online codes to write the following example. Except for the trickle charger function, all the internal RAM and register functions were used, including the burst mode. I think what I wrote is clearer than most programs o
[Microcontroller]
Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号