Introduction to the main features of the STM32F030C8T6 microcontroller

The STM32F030C8T6 microcontroller is a 32-bit M0 series LQFP-48 single-chip microcomputer, a cost-effective ARM single-chip microcomputer, which is widely used in the electric vehicle and home appliance industries. This article will crack the STM32F030C8T6 single-chip microcomputer.

The STM32F030X4/X6/X8/XC microcontrollers operate over a temperature range of -40 to +85°C with a supply voltage of 2.4 to 3.6V. A comprehensive set of power saving modes allows the design of low-power applications. The STM32F030x4/X6/X8/XC microcontrollers include four devices with different packages, ranging from 20 to 64 pins. Depending on the device selected, different peripherals are included.

These features make the STM32F030x4/X6/X8/XC microcontrollers suitable for a wide range of applications such as application control and user interfaces, handheld devices, A/V receivers and digital TVs, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVAC.

Key Features:

1. 16 to 256kb flash memory

2. 4 to 32 kBytes of memory HW parity

3. Digital and I/O supply: VDD = 2.4V to 3.6V

4. Analog supply: VDDA = VDDto3.6 V

5. Power-on/power-off reset (POR/PDR)

6. Low power consumption mode: sleep, stop standby

7. 4 to 32MHz crystal oscillator

8. Calibration of 32 kHz oscillator RTC

9. Internal 8MHz RCx6 phase-locked loop selection

10. Internal 40kHz RC oscillator