Problems with single-step debugging of STM8

• Learn ARM development(16)
  There are many things to learn about ARM, and interrupts are definitely something that needs to be learned. Since the CPU introduced interrupts, it has truly entered the multi-tasking system and greatly improved work efficiency. ...
• Learn ARM development(17)
  Because all embedded systems use interrupts, how does my S3C44B0 interrupt the process? Then I need to understand the whole process. To understand it in depth, the best way is to write a program ...
• Learn ARM development(18)
  Last time, we have learned about the interrupt handling process of ARM and how to set the interrupt function. So, does it work like this? The answer is no. Because S3C44B0 has several registers that control ...
• Embedded system debugging simulation tool
  After the embedded hardware system is designed, it needs to be debugged. Whether it is hardware debugging, software debugging or program solidification, debugging simulation tools are needed. ...
• A small question that has been bothering me recently has finally been solved~~
  Recently, I have not been able to understand the concept of drivers very well. Sometimes I can get a feel for it by combining some USB examples written by others, but because the ARM system does not directly explain the pins like the microcontroller ...
• Learn ARM development (1)
• Learn ARM development (2)
• Learn ARM development (4)
• Learn ARM development (6)

Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.

• Historical Article Catalogue of "Microcontroller and Embedded System Applications"
• Opportunities for Embedded Systems in the Internet of Things Era
• Viewing the IoT from the Perspective of Embedded Systems

• ASML predicts that its revenue in 2030 will exceed 457 billion yuan! Gross profit margin 56-60%
• Detailed explanation of intelligent car body perception system
• How to solve the problem that the servo drive is not enabled
• Why does the servo drive not power on?
• What point should I connect to when the servo is turned on?
• How to turn on the internal enable of Panasonic servo drive?
• What is the rigidity setting of Panasonic servo drive?
• How to change the inertia ratio of Panasonic servo drive
• What is the inertia ratio of the servo motor?
• Is it better for the motor to have a large or small moment of inertia?