Chinese application note "AN3343 - MCC SMPS Library Configuration for SEPIC LED Driver Demonstration Board"

Latest update time：2021-11-02 19:29

Reads：

MCC SMPS Library Configuration for SEPIC LED Driver Demo Board

Introduction

The Single-Ended Primary Inductor Converter (SEPIC) LED Driver Demonstration Board is a hardware platform designed to demonstrate the flexible control capabilities of Microchip's Core Independent Peripheral (CIP) hybrid power microcontrollers, typically used in Switch Mode Power Supply (SMPS) LED applications. The demonstration board integrates the PIC16F1769, a freely programmable Power Management Integrated Circuit (PMIC) device that can be programmed using code generated by the MPLAB® Code Configurator (MCC) SMPS library.

In today's recommended application note, the MCC SMPS library is used to quickly and easily configure and generate code for the peripherals used on the SEPIC LED Driver Demonstration Board. The MCC SMPS library is a user-friendly plug-in that needs to be installed on the MPLAB X Integrated Development Environment (IDE) and MCC. The library generates drivers for controlling and driving the CIP Hybrid Power Supply microcontroller peripherals based on the settings and selections made in the Graphical User Interface (GUI).

main content

characteristic

Test Points

MCC SMPS Library Settings

Create a new project using the PIC16F1769 device
Setting up a SEPIC LED driver using the SMPS library demonstration
Setting up a SEPIC LED driver using the SMPS library power topology

SEPIC LED Driver Demonstration Board Testing

in conclusion

By using the MCC SMPS Library to configure peripherals and generate code for Microchip CIP Hybrid Power MCUs, users can quickly and easily develop firmware for SMPS LED applications. This application note shows the user how to use the MCC SMPS Library to run the SEPIC LED Driver Demonstration Board.

Click " Read original text " below to view the full text.