Product Recommendation | Silicon Lijie | Configurable Mixed Signal Chip

Silijie MS-PLD product SY33518C is suitable for -65°C to 150°C temperature environment, supports a wide range of power supply from 3.0~5.5V, can be applied to a variety of scenarios, and is ideal for eSSD, notebook computers, switches and wired network products chip solution selection.

SY33518C connects each input signal and sub-function module through the internal Crossbar, and then outputs the desired signal after combination.

The logic module is mainly composed of multiple LUTs, including a total of 9 2-bit LUTs and 8 3-bit LUTs. Each LUTs can be set to AND, NAND, OR, NOR, XOR, XNOR and Inverter, and can also be set according to Use the configuration that requires customization.

In the ACMP module, the internal reference voltage can be used to compare with the external input. The reference voltage range is 0~1.2V, where every 0.05V is used as a gradient.

SY33518C is equipped with GUI software developed by Silijie. Within the software, you can set the parameters of the module in Component Properties, and connect and drag the internal modules in the Design Area to complete the circuit design, reducing development costs. The configured program can be downloaded to the chip EEEPROM through I2C/UART, ensuring that it can work normally even after power failure and restart.

Compared with MCU and FPGA products, PLD products are cheaper and have smaller packages. The package of SY33518C is only 2*3mm, and the power consumption is usually only 1-3mA, which reduces the circuit size in practical applications and does not add more power consumption.