Synchronous operation circuit of two AC commutator motors
Source: InternetPublisher:桂花蒸 Keywords: Rectifier motor BSP Updated: 2021/07/01
Two AC commutator motors can be used in certain equipment that requires both adjustment and synchronous operation through appropriate connections
, as shown in Figure 3-185.
In the figure, 1Mi and 2M are main motors No. 1 and 2 respectively; 1Mz and 2M2 are blowers No. 1 and 2 respectively; lM3 and 2M3 are servo motors
No. 1 and No. 2 respectively ; isoL and 2SQi are machine No. 1 respectively. and the high-speed limit switch of the No. 2 machine
; iSQ2 and 2SQz are the low-speed limit switches of the No. 1 and No. 2 machines respectively.
- Car ice warning circuit sharing
- How to Make a Simple Chicken Incubator
- How to Build a Gesture-Controlled Elevator Prototype Using Arduino Nano
- How to set up a cheap beam break sensor control distance scene using a reflector
- A small improvement to the temperature and water level indicator alarm
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Simple phase failure protection circuit composed of intermediate relay
- IGBT modules block overcurrent by controlling the gate
- Design and analysis of voice control circuit
- Magnetic door and window anti-theft alarm
- Smoking Cessation Circuit
- Fish pond oxygenation reminder circuit
- Egg warming circuit
- Peanut and melon seeds roasting machine circuit
- Chicken supplementary light to increase egg production rate circuit
- Agricultural small tractor lighting circuit
- Mixer built with analog multipliers
- Simple AGC circuit in transistor radio
- Multi-frequency resonant high-frequency power amplifier circuit for transmitter stage
- Guest arrival signal recognition circuit
京公网安备 11010802033920号