Addition circuit
Source: InternetPublisher:司马缸砸光 Keywords: Arithmetic circuit BSP resistor Updated: 2021/06/21
The addition circuit generally adopts the inverting input method, that is,
the inversion addition circuit. It is based on the inverting input operational amplifier circuit, and the signal
voltage
to be added is connected
to the inverting input terminal of the operational amplifier through a resistor .
The addition circuit is shown in Figure 7-5. This is an
inverting addition circuit with three input signals. The input signals
8ii, 2, and 1113 are all input from the inverting input terminal N, the pin is
a feedback resistor, and the non-inverting input terminal P is grounded through the balancing resistor R4
. The resistance value of the balancing resistor R4 should be
the parallel sum of Ri, R2, R3 and Rr. The output voltage of
the addition circuit is equal to the sum of the input voltages of each branch. This
structure can realize the addition of multiple input signals .
- How do you calculate the value of capacitors in series? Why use capacitors in series?
- Working principle and truth table of JK flip-flop
- TL494 pin functions/configuration/ratings/operating conditions/layout diagram
- Ceramic filter structure/working principle/characteristics/application
- Summary of knowledge points of multiplexer
- Touch circuit design and analysis
- LED Bicycle Lights
- Common electrical circuits: frequency-selective (bandpass) amplifier circuit
- Circuit diagram of an example of differential and integral circuits
- Frequency divider that converts 50Hz or 60Hz frequency into 1/60 frequency (CD4040)
- Ultrasonic blind pathfinder circuit
- Domestic KD8041 integrated phase locked loop
- Mixer built with analog multipliers
- Junction field effect transistor mixer circuit
- Simple AGC circuit in transistor radio
- Capacitive feedback oscillator circuit
- Differential Amplifier Circuit
- Second-order active band-stop filter circuit
- color discrimination circuit
- Sawtooth wave generator circuit (2)