Addition circuit
Source: InternetPublisher:抄写员 Keywords: Arithmetic circuit BSP resistor Updated: 2020/06/08
The addition circuit generally adopts the inverting input method, that is,
the inversion addition circuit. It is based on the inverting input operational amplifier circuit, and the signal
voltage
to be added is connected
to the inverting input terminal of the operational amplifier through a resistor .
The addition circuit is shown in Figure 7-5. This is an
inverting addition circuit with three input signals. The input signals
8ii, 2, and 1113 are all input from the inverting input terminal N, the pin is
a feedback resistor, and the non-inverting input terminal P is grounded through the balancing resistor R4
. The resistance value of the balancing resistor R4 should be
the parallel sum of Ri, R2, R3 and Rr. The output voltage of
the addition circuit is equal to the sum of the input voltages of each branch. This
structure can realize the addition of multiple input signals .
- LED Bicycle Lights
- A practical automatic electronic welcome circuit
- Using Monostable Trigger to Construct Pulse Delay Circuit
- Symmetrical output three-way frequency circuit (74LS109, 74LS113)
- Pulse frequency doubling circuit composed of CD4013
- A night light made of LED
- Precision unity gain inverting amplifier circuit composed of INA105
- Typical application circuit of LM4911 for dual-channel amplifier
- 0dB current amplifier circuit designed with K1058/J162
- 4-channel single-ended output amplifier circuit composed of TDA8580J
- Motor overcurrent protection circuit
- stuttering correction circuit
- Ultrasonic blind pathfinder circuit
- Rice mill circuit
- Agricultural spraying and insecticide control circuit
- Domestic KD8041 integrated phase locked loop
- ring amplitude modulation circuit
- Inductive feedback oscillator circuit
- color discrimination circuit
- Various signal generator circuits
京公网安备 11010802033920号