6-bit static display circuit
Source: InternetPublisher:清宁时光 Keywords: Display circuit 74LS244 latch BSP Updated: 2021/09/28
Shown is a 6-digit static display circuit . In the figure, 74LS244 is a bus driver. The 6-digit digital display shares a common bus. Each
LED display is connected to a latch (such as 74LS273) to latch the display code of the data to be displayed. The display code of the displayed data
is transmitted from the data bus to the input end of each latch via 74LS244, and then latched by the specified latch through the address decoder 7415138.
The bus driver 74LS244 is controlled by IOW and A9. When the output instruction is executed to make W and Ag low at the same time, the 74LS244 opens
and transmits the data on the data bus to the corresponding latch (74LS273) of each display. In the circuit shown in the figure,
the addresses of each display bit from left to right are 100H, 101H, 10ZH, 103H, 104H, and 105H.
- FPGA Features and Architecture
- What are the parts of the fpga design process
- Datasheet/Pinout/Technical Specifications of LMC555
- Tutorial on building a NOT gate using BJT transistors
- Structural diagram and function of sliding resistor
- Using an Op Amp to Drive a Simple and Practical Power Amplifier
- Make a simple AM radio with digital circuit
- Simple LED advertising light circuit
- The quadruple frequency circuit composed of CH7555
- Environmentally friendly and energy-saving LED AC/DC dual-purpose lamp
- Motor forward and reverse control wiring diagram (2)
- Electric massager circuit
- High-efficiency speaker circuit for rural stage
- Straw returning to field crusher circuit
- Mixer built with analog multipliers
- Double detuned loop frequency discriminator circuit
- base amplitude modulation circuit
- Digital stopwatch display circuit
- Various signal generator circuits
- AD1674 interfaces with PC bus through SN74LS244
京公网安备 11010802033920号