[Gizwits Gokit3 Review] Part 5: Low power consumption! Why is the power consumption still so high?

w494143467

[Gizwits Gokit3 Review] Part 5: Low power consumption! Why is the power consumption still so high? [Copy link]

 

1. Introduction

I was anxious to test the low power consumption and then use it, so I immediately wrote a post.

2. Operation

Because you can choose low power consumption when creating a product, I thought it should be a model, so I kept thinking about trying it, and then I created a low-power product.

Figure 1

Before installing, add data points, and then generate codes. The mobile phone is configured with the network normally.

Figure 2

When I looked at it, the power consumption was actually the same as normal. I was wondering if low power consumption was just the name of the product, and not the program entering low power consumption, or if it would enter low power consumption only under certain conditions?

Figure 3

3. Summary

If there is no low power consumption, it may not be very good, because the current of more than 100 mA is not small. Let's study it later!

Jacktang

More than 100 mA does not look like a low-power product

dcexpert

The hardware doesn't seem to be designed for low power consumption.

数码小叶

You need to modify and optimize the board program yourself. This option is not very meaningful, after all, the generated code is general.

w494143467

Jacktang posted on 2021-3-21 21:11 More than 100 mA does not look like a low-power product

Yes, I think I should write my own code configuration

w494143467

dcexpert posted on 2021-3-21 22:14 It seems that there is no low-power design in the hardware.

Does that mean there is no way to reduce power consumption?

w494143467

Digital Leaf published on 2021-3-22 09:03 You need to modify and optimize the board program yourself. This option is not very meaningful, after all, the generated code is universal

Well, let’s try it then!