Training
Profile
This course introduces how to generate common platform code in the cloud and how to port the code to other platforms step by step. If you are using other types of chips, you can also imitate the development process shown in the video to achieve secondary development and transplantation.
Chapters
Chapter 1：GoKit3 introduction (9 minutes and 26 seconds)
Chapter 2：Introduction to self-service development platform (20 minutes and 12 seconds)
Chapter 3：Introduction to GoKit3(S) development kit (1 minutes and 51 seconds)
Chapter 4：GoKit3(S) configuration network access and control (5 minutes and 22 seconds)
Chapter 5：Introduction to GoKit3(V) Development Kit (1 minutes and 59 seconds)
Chapter 6：GoKit3(V) configuration network access control (4 minutes and 43 seconds)
Chapter 7：GoKit3 code automatic generation tool (12 minutes and 26 seconds)
Chapter 8：GoKit3 DEV SDK Common version porting instructions (12 minutes and 0 seconds)
Chapter 9：GoKit3(S) development environment construction (17 minutes and 16 seconds)
Chapter 10：Detailed explanation of GoKit3(S) source code (24 minutes and 28 seconds)
Chapter 11：GoKit3(V) resource management tool (11 minutes and 40 seconds)
Chapter 12：Detailed explanation of GoKit3(V) source code (28 minutes and 3 seconds)
Chapter 13：GoKit3(V) secondary development-detailed program explanation (28 minutes and 3 seconds)
Chapter 14：GoKit3 secondary development-general platform version transplantation instructions (12 minutes and 7 seconds)
Chapter 15：Gokit3(S) secondary development-detailed program explanation (24 minutes and 28 seconds)
Chapter 16：GoKit3 secondary development-Introduction to automatic code generation tool (10 minutes and 58 seconds)
You Might Like
Recommended Posts
- Problems with SD card file transfer continuation under WinCE 5.0
- I would like to ask a question about resuming file transfer to SD card: When writing a file to the SD card, execute the Suspend operation, and then Resume to continue the unfinished part of the last t
-
lingd
Embedded System
- After downloading the program with MDK4.72A, it always pops up that μVision4 has stopped working
- After downloading the program with MDK4.72A, it always pops up that μVision4 has stopped working and must be closed. Has anyone encountered this problem before? How to solve it? Thank you
-
zz黑猫zz
stm32/stm8
- [Questions and Answers] Why does the LED blink faster when using on-chip ROM?
- Why does the LED flash time become faster when using ON-CHIP ROM? Please help. Thank you. The program is as follows: #include #include#include "inc/hw_types.h" #include "inc/hw_memmap.h" #include "dri
-
yanxinboy
Microcontroller MCU
- Newbie's question: Problems with generating PCB from schematic diagram
- After I drew the schematic and generated the PCB, the GND network disappeared. There was only a power line but no ground line. What happened? I repeated the operation several times and modified the sc
-
wxlpy886
PCB Design
- IO simulates serial port, but there are some timer issues. I hope an expert can give me some advice.
- Since the UART port is used for other purposes, there is one IO port left on the board. In order to complete the serial port function, this IO port is used to complete the serial port function.After l
-
aahellaa
Microcontroller MCU
- Cannot find the device node of an I2C device under Linux
- [i=s]This post was last edited by lzwml on 2015-12-9 15:41[/i] [size=5][color=#0000ff]Question 1: Where is the device node of the I2C device driver? @embedsky nfs]# find / -name "at24"[/size] [size=14
-
lzwml
Linux and Android
Recommended Content
Web users are watching Change
- Problems with SD card file transfer continuation under WinCE 5.0
- After downloading the program with MDK4.72A, it always pops up that μVision4 has stopped working
- [Questions and Answers] Why does the LED blink faster when using on-chip ROM?
- Newbie's question: Problems with generating PCB from schematic diagram
- IO simulates serial port, but there are some timer issues. I hope an expert can give me some advice.
- Cannot find the device node of an I2C device under Linux
- Learn wince development
- Microcontroller beginner experience
- I have searched for some information on silk screen devices and hope it will be useful.
- 【CN0160】Universal Serial Bus (USB) Peripheral Isolator Circuit
- Dear moderator, what is the difference between STM8S208 and STM8A5189 in the CAN part?
- How to cross-compile readline
- Three-axis position sensor interface circuit
- Tips for implementing I2C with MSP
- How to collect and monitor data 20 kilometers away using wireless transmission?
- Allegro Constraint Setup
- TI AM335X Android DevKit File system Manifest
- Does this system require external RAM?
- ARM-based support for advanced video graphics capabilities on MCUs
- Bill Gates' 11 principles (English and Chinese)
- Has the STM8S crystal oscillator anti-interference problem been solved?
- I like FPGAs
- 12-bit ADC
- Python implements batch conversion of ppt to pdf
- Brothers who are engaged in embedded development, which city are you in?
- Selection advice:
- Openwrt learning summary
- The second gift for the moderator
- The influence of inverter grounding on interference
- How to realize CAN/zigbee conversion
Popular Components
Just Take a Look
Hot Downloads
- LCD display experiment
- Application of MATLAB Neural Network Toolbox in Fault Diagnosis
- DS-107-00003cn
- 2 Nexar Getting Started Tutorial
- Analysis and Application of UPS Uninterruptible Power Supply
- Test methods for current and voltage of hot wire and filament of electron tube
- Unicom SGIP protocol
- This code implements the use of SNMP to modify the ARP table
- Contains two source files for parking management
- MOS tube parameter description
MoreHot Articles
京公网安备 11010802033920号