[Gizwits Gokit 3 Review] Part 2: Product Creation

w494143467

[Gizwits Gokit 3 Review] Part 2: Product Creation [Copy link]

 

1. Introduction

In the last post, I wanted to test the production program, but after consulting and posting, I seem to know that the program is not included when it leaves the factory. Today, I will produce a product program myself. I hope that my final product can be turned on by my home computer outside. The design is also relatively simple, and it should use a servo. Let's try to create a product first!

2. Product Creation

After successfully logging into the official website, choose to create a new product in your personal project.

Figure 1

Then select product category, name, technical solution, etc., as shown in Figure 2.

Figure 2

After producing a product, click on the product name.

Figure 3

Add data, here is a simple test to turn on the LED light!

Figure 4

Fill in the data name, read/write type and data type.

Figure 5

After successful creation, you need to click Apply, then click MCU Development to generate the board code.

Figure 6

Select the hardware platform, go to the product and copy the [Product Secret] code, then click Generate Code.

Figure 7

Finally, click download to download the relevant program!

Figure 8

After the program is downloaded successfully, a compressed package is obtained.

Fig. 9

3. Summary

It is very easy to create a product. It is easy to get started. In the next article, we will see if the code is easy to understand. The first step of the Demo is successful. It is very simple!

freebsder

It looks quite fool-proof and not complicated.

w494143467

freebsder posted on 2021-3-9 22:12 It looks pretty foolproof and not complicated.

Yes, it’s very simple, because it is designed to shorten the development cycle.