dc24v-ac220v inverter terminal block pcb-9 tb available fuse 50A cooling fan 12v ntc 10k egs002 tb The output end of the transformer needs to be connected in parallel with a high-voltage capacitor, as shown in the figure. The load attached to the BOM is Huawei's 40w fast charging current power diagram and Actual picture, here I am using a 60w transformer, which cannot carry T12. There is no problem with the 3-speed high-speed phoenix of a small household table fan. The only regret is that I don’t have an oscilloscope to see the waveform and frequency. Is it consistent with the 50hz sine wave in the manual? , the potentiometer on the board is used to adjust the output voltage.
All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.
It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.
Supported by EEWorld Datasheet